yopappamon
10 kW
Who makes the hall connector on the Infineon controller from e-bikekit and where is a source to get them?
Is it a Molex?
Is it a Molex?
Infineon controller connectors
- Thread starter yopappamon
- Start date
GCinDC
100 MW
great question. i'd love to know too! links anyone?
number1cruncher
1 kW
yopappamon
10 kW
number1cruncher said:
The pins aren't the same on those.
number1cruncher
1 kW
yopappamon said:The pins aren't the same on those.
I'll keep looking, as I'm interested to know as well. Have you contacted Jason at E-bikekit.com?
yopappamon
10 kW
No, I just started looking. I flipped though 300 pages in the Newark catalog and didn't find anything.
icecube57
10 MW
TNC has the connectors. Are you looking to buy the connector or do you just want the name.
GCinDC
100 MW
While we're at it, it'd be handy to find the throttle connectors, male & female & contacts too!
icecube57
10 MW
GCinDC said:
http://tncscooters.com/partsdb.php?type=ES
Half way down the page. Both male and female housing and contacts are 50 cents.
yopappamon
10 kW
Excellent, thanks!
hardym
100 W
My Infineon controller also uses 2 & 3 pin connectors for the throttle throttle display, and cutoff. Anther Infineon controllere uses this same connector for 36/48V operation.
I've orderd these from all-electronics.
http://www.allelectronics.com/make-a-store/item/CON-340/3-CONDUCTOR_LOCKING_CONNECTORS_W-_LEADS/-/1.html
These includes the leads, which is a problem.
I think the manufacturer is JST
See this link: http://www.jst-mfg.com/product/pdf/eng/eSM.pdf
Also, these connectors are not on their website, but If you call TNS Scooters, they'll sell them to you.
http://tncscooters.com
Mark.
I've orderd these from all-electronics.
http://www.allelectronics.com/make-a-store/item/CON-340/3-CONDUCTOR_LOCKING_CONNECTORS_W-_LEADS/-/1.html
These includes the leads, which is a problem.
I think the manufacturer is JST
See this link: http://www.jst-mfg.com/product/pdf/eng/eSM.pdf
Also, these connectors are not on their website, but If you call TNS Scooters, they'll sell them to you.
http://tncscooters.com
Mark.
Beavinator
1 kW
- Joined
- Aug 17, 2010
- Messages
- 362
Here you guys go. It is labelled ConBag. You can buy the whole set or they will sell individual connectors. http://ebikes.ca/store/store_connectors.php
Similar threads
