How to identify a connector???

Does anyone recognize this connector or can point me in a good direction to look? I spent about 2 hours with google and came up empty.

It looks a bit like an AMP MiniFit JR... but give us the pin to pin spacing, that will help a lot.
http://www.molex.com/molex/products...oducts&chanName=family&pageTitle=Introduction

The manufacturer's series numbers/letters are often somewhere on the connector too.

Thanks gents. If it's not the Molex Mini-Fit, then it's a copy. I have to wait for some light to verify the 4.2mm spacing and see if there is any kind of identifying number, but based on the taped up outside housing dimensions it's pretty close to the drawing in the pdf.

John