Connecting controller w different wiring

Hi! Got cutouts more and more often until one day the damn thing stopped working completely. It is a powabyke Euro X-24 btw. I changed to a new throttle but apparantly that wasn´t it. When measuring conductivity on the motor wires they seem to be ok. So I opened the controller and one of the mosfets had a distinct darker colour than the other two which led me to believe that the controller was guilty. I then bought a new universal controller on ebay. Need some help connecting it as the wiring is not the same. The connections for battery and motor was easy but then it says red and blue goes to ignition. From the ignition there is a tiny orange and blue. Should those go to red and blue on the controller? By looking at the pictures - can you give me any other hints? Any help would be greatly appreciated!

http://tinypic.com/2mpmn7ki

(Posting this again as my old topic posted today seems to have dissapeared. I hope I did not break any rule so that mod removed it.)

http://www.ebikes.ca/learn/troubleshooting.html Check for a blown mosfet on your old controller.

http://www.endless-sphere.com/w/index.php/Determining_the_Wiring_for_a_Brushless_Motor

bowlofsalad said:

http://www.ebikes.ca/learn/troubleshooting.html Check for a blown mosfet on your old controller.

http://www.endless-sphere.com/w/index.php/Determining_the_Wiring_for_a_Brushless_Motor

Click to expand...

Those were two VERY useful links! My problem is now solved. Thank you so much!