high quality flexible silicone wires LAST CALL!

[Ypedal]

Just finished counting , twice, i get 80 strands per bundle, for a total of 1440 strands of 0.07mm wire.

I have some 10awg here, and 12, will do those later if timer permits.. tomorrow at the latest !

I was supposed to send , oh god.. who was it now.... i think Texaspyro.. some samples of various types of cable i have and use, procrastinator king that i am.... have not done it yet.

He has very accurate and calibrated equipment to calculate resistance down to the rediculous decimal....

Not trying to be a threadjacker either, i honestly plan to buy a few 100ft of various gauges and colors of the stuff very soon, so i want to know who's got what...

[gensem]

much better in every aspect I could think of.... ask him a sample Ypedal im sure you ll like the wires

[wojtek]

samples - no problem

attached is the specification of those wires

[rojitor]

The wire is thicker compared to the same awg from turnigy, I have several gauges at hand so i can tell.
To be truth the 10awg turnigy looks like 11awg aside a 10awg Wojtek wire.
Im not saying turnigy is bad, its probably up for the task, but Wojtek wires are better.

so it's true they're thicker, i can't measure the wires because i haven't got any devices, it was just a feeling in my hand,when peeling i usually remove a lot of fibres along with the silicone,this time i peeled rubber only so the silicone is softer or the fibres are stronger.

[wojtek]

sorry for the delay in answering to your price requests. I will send most of you a reply today..

[wojtek]

LAST CALL!!!

if you want to get some of those excellent quality wires at cost price, order now or never.

running out on 6/8/10/12/14 awg

still have plenty of 20/22awg as well as balance parallel adapter wires [5s, 6s, 7s] and parallel charging wires with and without connectors pre soldered.

AS IT IS JUST A NON FOR PROFIT GROUP SELL, I WILL NOT BE IMPORTING ANYMORE OF THOSE SO FIRST COME FIRST SERVED UNTIL STOCK LASTS

[wojtek]

FIRST VICTIMS: 12awg black and red are gone...

[wojtek]

10awg sold out..

still some 6/8/14awg left...

[wojtek]

update
still have 6/8/20/22/28 AWG wires and plenty of balance leads 3/4/5/6/7 to 1 for 5/6/7s packs and 4/5/6 to 1 main leads for quick lipos assembly with 4mm or 5.5mm bullets

[Njay]

I can't find the 6AWG price on the list, what is it? And what colors do you have?

[icecube57]

Just a side note the 10g might not fit 4mm bullet housings.

Sent from my NOVO7 Tornados using Endless Sphere

[wojtek]

viewtopic.php?f=31&t=32244&p=656241&hilit=6awg#p656241

6awg wire red or black per 1m 9EUR / 12USD/ 8 GBP per meter + shipping *LIMITED QUANTITY -> the price is quite high comparing to 8awg probably as it is not a common size and they don't produce much hence i only took few meters for testing and those who have high amp needs and want high quality flexible thick wires...

this is all clearance prices at costs - will not be getting anymore, trying to get rid of the remaining items before end of November as moving houses

correct 10awg won't fit 4mm, but will be good for 5.5mm / 6mm or XT150...

[mikec5537]

Hi Wajtek,

Do you still have any 8AWG in black and red?

I could use 4 meters of each

Best regards

Mike