UK Server supplies 12V&24V 32,36,41,57,73Amps Plug&Play

[Idontwanttopedal]

Fast delivery yet to use as charger not here yet lol

[whereswally606]

Bump. bump bump

[Craigh85]

Pm sent

[whereswally606]

bump bump

[daniel..]

My laptop charger power supply is too slow and unreliable... I'll take one of these. With bullet sockets for my icharger and to be shipped to Spain, please. Pm me your payment details.

Regards,

Daniel

[whereswally606]

PM reply sent Daniel
regards Andy

[whereswally606]

bump bump. listed on ebay too.

[nonlineartom]

just got round to using mine. Terminals on the PSU aren't labelled positive and negative, which is which>

[whereswally606]

hey non linear Tom,

the four outer pads top and bottom are all gnd i.e. negative

the large rectangle in the middle on the top is +12v

so the connector facing out of the middle is positive and the connector at the edge/side is -12ve/gnd

a nice pic to help explain too

IMG_0238.JPG (99.33 KiB) Viewed 672 times

i would also check for yourself with a multimeter but im sure 100%

[darren1678]

hay there

just got my psu, looks brand new, but

i'm so not happy.....

i didn't get a kettle lead

lol, i'll let everyone know how i get on when i get it up & running

[whereswally606]

Sorry Darren, I didn't get any kettle leads either when i ordered them from my initial supplier. what thinking about putting a disclaimer up about the kettle leads but i figure everyone must have one spare or in a computer somewhere. Let me know how its works for you.

[darren1678]

Sorry Darren, I didn't get any kettle leads either when i ordered them from my initial supplier. what thinking about putting a disclaimer up about the kettle leads but i figure everyone must have one spare or in a computer somewhere. Let me know how its works for you.

didn't you see the smiley

i was kidding didn't think i would get one

[darren1678]

just too let everyone know

this power supply is good, i'm very happily charging my lipo's at at 1c, my chargber will never tax this power supply but it's rock solid, for what i need

i'd recomend this guy to anyone in europe

as his price is more than fair

[whereswally606]

Was running low on power supplies to modify and sell, went on a hunt. found some more !!!

just ordered another 20.

Any takers?

[whereswally606]

Just taken a bulk shipment of 24 more (actually 36 but 12 are spoken for)

Thanks to all the customers so far.

[Alastor]

Thanks for the power supplies man both came in in great condition very well packed.

I am using one of them for my balance charger down there.I want to experiment with the second one to see if i can charge my solar setup when the voltage is low.So i modified one of the power supplies for 13.2 volts for testing.
I think i might need a DC/DC step up converter to do so but i want to test it out .

[Bobonthelough]

Psu arrived promptly and well packaged. Andrew was very helpful in giving advice.Email replies were almost instant! Will use this for rc charger/balancer.

[whereswally606]

Thanks Bob and Alastor/Andreas for the kind reviews. Got a few pics off a chap who I sold to on Ebay. He's using a supply to go from passive to active subwoofer

A nice job i think he has done







Anyway I took a large shipment of 26 and so if anyone needs a supply please don't be afraid to IM me

£25.30 as always to ES members.

Thanks again Regards Andy

[Alastor]

Feeding an audio amplifier is also a nice indication of the power supplies quality
I am getting more and more fund of them as time passes

[whereswally606]

new update on the powersupplies. I have found boxes to enhance my shipping. The boxes my fathers printing business recieve toner for the photocopiers are an excellent fit for the powersupplies. This should mean increased protection whilst shipping and decrease the time it takes for me to pack them up. To enhance my delivery time i have made and packed some psu's ready to be posted at the place of work in central stockport. I should be able to organise a courier for these supplies in the week from anywhere in the world.

In other news i have designed a parallel bus bar connector which i will hope to be selling soon. when i have the actual connector i am bring to market i will have pics as yet i have only build the prototype in my other thread.

viewtopic.php?f=2&t=45009

they will initially be for 4mm bullets only however eventually i will look into other designs too.

The casing for the parallel bullets will not use the plastic shells from the bullets instead i will have another more producible solution. The aim is to allow people a safer more compact plug and play solution for people to build large capacity lipo packs.

parallel first series later.

A massive thanks to the customers and supporters of my products so far, been a great journey and learning curve.

[tricky43]

Sounds good I want one

I'm in Stockport, where in Cheshire are you?

[whereswally606]

Hey tricky, sent you a PM will meet you to avoid a postal charge and have a chinwag.

chargers are currently prepacked ready to be shipped.

[whereswally606]

Shameless almost new years bump

come on fellas i need to earn some more to pay for decent brakes for my missus' bike.

[ducsi]

Hi,

I am from Hungary. I would like to buy two PSUs, how much is the shipping price to here?

Thanks
p.s.: ebay, or your shop, or PM and paypal?

[amigafan2003]

Would one of these be safe to series up with a 48v meanwell so I can charge my 15s packs?

I'm currently using the meanwell + a 220w hobbyking special that I don't trust.