Matt S reduction unit and FOX DH Van R shocks

[Timma2500]

Hi guys,



3220, HV160 and ENO/ TryAll cranks are SOLD!


I have two 2009 FOX Van R DH shocks for sale. These are brand new never used. They measure 220mm eye to eye with approx 16.5mm x 10mm dia and approx 32mm x 8mm dia bushes but you can buy almost any size bushes through FOX dealers. They are adjustable for spring preload and rebound and come with 400LB springs.

I paid $130AUD each, selling for $110AUD each or both for $190AUD + postage.



Lastly, my Matt S reduction unit. Never got around to using it so it has to go. It has a 70t #25 sprocket and an outboard bearing ID of 3/8" to suit an Astro motor shaft.
It is missing one mounting bolt but thats a 50c part to replace.

Paid $250USD, selling for $200USD + postage.

Fox Van R Shocks.jpg (120.29 KiB) Viewed 1240 times

Matt S Reduction Unit...jpg (109.68 KiB) Viewed 1240 times

Matt S Reduction Unit.jpg (111.3 KiB) Viewed 1240 times

[Timma2500]

Price reduction for Matt s reduction unit and 2 x Fox shocks price, need these gone guys!


Paul

[sn0wchyld]

Price reduction for Matt s reduction unit and 2 x Fox shocks price, need these gone guys!


Paul

hey mate
is the matt reduction compatible with the turnigy motors? or just the astros? cheers.

[Timma2500]

hey mateis the matt reduction compatible with the turnigy motors? or just the astros? cheers.

Sorry Snowy, i haven't checked this thread for ages!
I know you've bought a Neugart gearbox but incase other people are wondering / interested, i'll check whether a turnigy will fit when i get home.

The Matt S reduction unit is still for sale! Price drop - $120AUD including postage worldwide. Its gathering dust in my shed, i'd rather see it in someone elses build thread




Paul

[Timma2500]

Ok i checked the drive unit with a Turnigy, it wont bolt up directly but it will fit with a simple adapter plate.

Any takers?


Paul

[7lions]

I'll take the reduction drive if it's still available. This will eventually make a nice drive unit for my velomobile!

[Timma2500]

Sorry mate, just sold it...

Paul

[7lions]

Roger that - thanks for letting me know!