Hi Guys :)
does any body know the pedal sensor type in a hd motor and how many pulses per revlutiojn it should be? There ar 4 wires from the mtor Red, Black, Grey and white...?
is it one of these?
There are 4 pedal sensor archetypes:
Single output dual hall sensors produce an output only in...
Hi,
I’ve noticed some chargers have a yellow blue and green wire as well as the red and black …. Just wondering what these are for and is it possible to get the chargers to work with out these ?
Many thanks,
Adam
Great thanks for the advice guys. I was messaged this video too,
https://www.youtube.com/watch?v=OR472ONL7JI&t=18s
And for left over flux residue the IPA cleaner will take it off.
I been using a 100w one now and really trying to get heat in the nickel too by holding iron tip onto nickel and feeding solder in it in until flowing nice. Scoring the surface seems to make it stronger but i can still bend the nickel off the back of the solder but maybe I'm just asking too much
Hi all,
So Im upto soldering the wires onto my 18650 pack and im testing my solder. Using IPA cleaner and a flux pen.
Ive tested 60/40 and lead free Tin solder. I can peal the nickel back off the solder. As in picture
Obviously the nickel on the pack wont be able to peal backwards but im...
Yup, Dave has advised us he will build a 3205 motor for 1500W.
Also now we are going to have a custom frame built byhttp://www.traversbikes.com/bat-fastard.html more than likely with a battery casing built into the main triangle.
If you email to them they will reply with the price. They have quoted me:-
CFM608 frame (fork + frame + derailleur hanger) 508USD
1 rim FB100 226USD
1 rim FB80 214USD
Good Day all,
I have a customer that wants me to build the lightest possible e fat bike. We are going to be using one of these frames ( or any think you can recommend)? >>
http://www.carbonbikekits.com/frames/CFM608_Full_Carbon_Fat_Bike_Frame-en.html
We would like a Mid Drive kit and we will...
Im struggling to set up my CA3 to TDCM bb for Proportional Throttle. I want it to be as smooth as the Bosch systems if possible. but its going on its own and only stops when I pedal backwards etc... I have a Grin 40a controller and H4080 motor. Are there any advise parameter setting for this...