Recent content by BARE

A HUGE REVELATION. My issues are a result of the sharing of both, the cut off brake switches AND the HAL 2 speed switch to both controllers. I thought nothing of splicing the brakes and 2 speed switch to both controllers, but what a bunch of quirks and dysfunction resulted. Even my...

Well I'm going to run with it for now and see what transpires before pushing my repairing skills. The advantage of redundancy plays a roll in this instance, which is a big reason I chose to run with dual motors in the first place, being a solitary soul in solitude. I plan to report back at some...

Based on your detailed analysis, confirming my process of elimination, I disconnected the 9 pin plug from the front motor and saw nothing amiss. I then reattached it and fiddled with the wire as it comes out of the axle, where it makes the 90 degree exit from the cap shield to head up the front...

My pursuit of the problem had me switching the connections between controllers, displays, motors. I have found that the front motor is the issue. Switching everything else to that motor, including disconnecting the shared brake cutoffs and HAL 2 speed switches, had no effect. The rear motor...

Thank you for all of that. I will recheck those issues and report back in a few days.

Yeah, I'm fearing that possibility as well, but I want to believe the quality is better than that, being new and around a while. But...

No difference. I'll try placing a jumper in place of the brake switches, but I think it's something else. The battery level symbol on the worse motor display shows no charge, while the battery is 100% and the other display shows that accurately.

The Xiongda 2-speed intrigued me, having just built a vintage MTB 2 wheel drive conversion and finding the old fire look out ridge top roads were too much slow travel for the average hub motors. But now, having just completed the 2 wheel drive, 2 speed conversion, I find my chariot is out of...

I received my shipment of 2 motors and controllers, July 20, 2023, 15 days after they received my payment and began the process of preparation. Prior to my sending payment I made a fruitless effort to acquire another means of shipping my purchase, to try and reduce the cost. Tina stated that...

Yes, just the motors. I think I will start a new thread if I'm going to continue chronicling my endeavor, since I believe this thread should be specifically about the current activity between individuals and Xiongda. Tina created it. Your thoughts?

Yes I did purchase direct from Tina at Xiongda. It is being shipped now. $130 each for 36v.300w motors, front and back. Everything seems to be going smoothly in dealing with them. I have read completely through the pertinent thread and, of course, recognize you. I never saw anything on doing 2wd...

Redundancy provides an increased confidence in solitary isolated travel. Motor and controller heat generation is reduced. Two small motors are much more inconspicuous than one large motor.

I suggest you email Tina, as I did. The address is tina@xiongdamotor.com.cn

Hi all, I may be in my own element, dealing with living in a small mountain valley and having high mountains all around. I built an AWD 90's vintage MTB this past winter to climb into the cloud engulfed ridge tops that I embrace here through my windows during the 4 seasons. I quickly found...