Recent content by bigbore

This is what this #301 Stealth Bomber looks like today with a new 70/100 - 19 motocross tyre at the front and Nucular 24F!

Those are Quigley mudguards from Australia.

Moose si dice Alce. But it's most probably from a Deer.

This is what I got with the copper washers, as expected they warped as soon as I tightened the spoke nipples. For now I have been using the new wheel for a couple of weeks without noticing any problems with the spokes.

Look what I found today during my (almost) daily sunset ride in the woods.

Yes, the DNM Hornet is this one: Mono ammortizzatore 295 DNM MTG-RC | eBay This one is also pretty cheap at 200€ shipped from Italy! I could try that one with this softer 600lb/in spring DNM Rear Shock Spring 600LBS 150mm For Pit Dirt Bike Motocross | eBay and meantime I could figure out how...

I chose copper washers because I think they will deform immediately as soon as I tighten the nipples and will form conical washers.

While I had the Bomber on the stand I took the opportunity to do some checks and repaint some ergal pieces that I had built in recent years and had not anodized. Having removed the rear shock absorber, I went to a shock absorber service center where they have a shock absorber check bench and I...

Yes, I followed the advice of TV and bought the spokes on Aliexpress "JQORG Official Store". They seems a good quality only the spokes nipples are a little bit small for the 7mm diam. holes of the rim so I also got some of these copper washers...

Ok, the stuff arrived and I took the measurements on the hub and rim as indicated on Spokecalc, free and easy to use spoke calculator. The spokecalc result is 222mm but my eye test tells me that 226mm should work better. I wrote to John Rob Holmes asking if he could provide me with a new set of...

Hello, I'm going to build a front moto wheel for my Stealth Bomber. Which spokes length are needed to mount this 19x1,4" rim MOTO 19x1.4 "Alu Rim - Black on this Sur-Ron front hub...

Hello, I'm going to build a front moto wheel for my Stealth Bomber. Which spokes length are needed to mount this 19x1,4" rim MOTO 19x1.4 "Alu Rim - Black on this Sur-Ron front hub...

Older APP solved the issue .... now the BMS seams like to be working as it should I also wrote a message in the message center on QUCC Official Store of Aliexpress that says: Fortunately there is a very useful forum on the net where I discovered that using the old APP version 3.1.1026 I can...

Thank you for the file. I will try your apk and the one I found here: xiaoxiang BMS APP 3.1.1026

I managed to download the file.