Recent content by bigbr1212

I am pretty sure they were connected the same, I cut one wire at a time and soldered it before the next hall. Plus I have checked the 36 different options for hall phase connections. I also used an Ebike tested and the hall magnets light up in order, as do the motor phase.. The controller hall...

We took a Cromotor V4 and milled down the flux ring and the spoke ridges. Titanium bolts, hybrid ceramic bearings. Vent side covers and countersink holes inside cover to slice the air better and T-9 corrosion protection on the windings. The motor is way lighter plus it looks really cool. I did...

Yeah it's a V3. I tried doing what you said but that didn't fix the problem.

I built and Ebike kit, and it overheated the hall wires because it wasn't well vented. I had the controller checked by Lyen and replaced the hall sensors and replace burnt hall wires. Now when i twist the throttle, the motor kicks on for a second then stops.. I have tested it with my Ebike...

I found a bad a$$ battery management system that I purchased and I am currently waiting for it to arrive. It's from freegopower.com. It's a 26s bms with 200amps continuous discharge current. Model: LFA-026-200-200amp.

I just blew my Bms. I don't think it's powerful enough.. Can anyone help..I have a 26s 84v 40ah lifepo4 pack with a 36fet Zelena Vozilla controller for my cromotor v3 and I had 10 shunts put on the controller so I can get 200+amps to the hub, but I'm having trouble finding a BMS that can handle...

I recently purchased a BMS unit called EMUS BMS by JSC Elektomotus. It's amazing, it has individual modules that attach to each series and has the ability to send information through its Bluetooth module to an app the company made that works on Andriod devices and it tells you the status of each...

I have been building on this bike for the past year and have decided to start my next ride. I build bijes for customers all the time but nothing like the bike I just built. Here are the specs. Enjoy!!! Cromotor V3 Lyen 24fet irfb4110 controller (in 2 weeks I plan on upgrading to a Xie Chang...

I recently finished building an Ebike that I plan on selling different models of but I wanted to post a few performance specs. The bikes was programmed Zombiess parameter designer and I set the rated amps @ 120 and phase amps @ 300 when I have the speed switch set to 115% of the power and my...

I recently finished building my Ebike and thanks to my buddy Edward Lyen I have an amazing controller and thanks to Mark for supplying me with the cromotor V3 it's the best thing that ever happened to my bike.. I started with just a frame and over time kept upgrading parts, I recently painted...

Haha. Thank you for the info. The spoke nuts wiggled loose and I misplaced them. I ordered replacement spokes from ebikeca. I also ordered a new rim for my other 9c hub. Why do you think I will need another axle? I actually plan on making a bigger axle to support bigger wires.the hub came with...

I bought my hub down at ebikesf in San Francisco and as soon as I got it home I had to upgrade the wires to as big as I could fit without machining a bigger stator shaft. I removed the cover and used a Dremel to cut more metal out of the shaft so the bigger wires would fit past the bearing on...

Please open the top cover of the casing. The silver aluminum casing has two parts, the top cover and the bottom cover. You just need to take off two top screws on each black faceplate respectively. And then the top cover can be taken off. Make a secure connection between the probes of voltmeter...

I have a LTX charger model: LT250-16L. I notice that there are other boxes on the charger with different model #'s. I recently purchased more cells and would like to charge my 23s lifepo4 pack. I was wondering if I can take apart the charger and change some resistors or something and make the...

This is a picture of the really bad ones that I am definitely removing and replacing. Or do you think I can use these ones too?