Recent content by clockwork247

Thanks again, this was very helpful. Got the required parts today and everything worked. Only thing that doesn't work is the battery indicator. Beautiful mid drive bike that is working great again because of your help.

Thank you, I was able to find some more info this morning as well. Looks like it's a 26V drive 250W unit. I did plugged in a 36V battery yesterday, hopefully I didn't fry anything... I have been informed that these things will not operate over 29.X volt, so that could be my issue of it not...

Thank you for catching that, I didn't realized the pictures didn't attached, I edited my original post.

I got an ebike with a bad battery, and I'm trying to fix it, looking at the battery connection, I got possitive/negative and grey wire. what the hell is that? and what kind of voltage would it take? see picture below. I tried connecting the battery without this wire and it doesn't work, the...

I have 3X scooter battery packs (36V) that I will wire in parallel to increase capacity and amp draw. Each of these 3 pack has it's own BMS, and also seperate charging port. Will I damage the packs if I charge from one of the charging port while they are still connected in parallel? Would the...

if your previous battery last you 6 years, I would go get it again, and if you want to increase your range, buy 2X of it. From personal experience, building DIY battery no-weld system is costly, and in the long run too much work to take care of. May I ask what battery did you get from your old...

I have a question about wiring, There are a set of wire I'm just stumped: The plug that's marked "K". This is a wire that came from the on/off switch at the handle bar. originally it's a Yellow and a Green wire, when they get down to the controller they split the wire up. the green is wire into...

Hi Everyone, I managed to get an ebike off CL, but it has a bad controller (I tested it with another controller from my other ebike and it works). So I need a new controller, unfortunately everything is in Chinese, and I can't figure out what I need. I know that it's 250W and 36V. But 250W...

I got some knock off imax b6AC off ebay, and I was wondering if there's a higher current charger out there, this thing is capped off at 6A, even if I'm only charger at 1S. I'm doing test on 100-200 cells, and it's taking a long time to charge all of them up (worst part is the dam thing start to...

magnets, with tin strip and your rubberband will do the trick. can you show us how you did it?

walmart sell the evo 1000w for 500 bucks. isn't that a better buy?

question. how did you hook the light up for discharge? there is no positive or negative in AC. so any polarity will work? also can i just cut the cord off my desk lamp and wire it up? thanks.

would this work? http://www.walmart.com/ip/38243769?u1=fcb2acd6780e11e59865ce6500428ba90002&oid=289955.1&wmlspartner=lw9MynSeamY&sourceid=13889064272363451782&affillinktype=10&veh=aff I rather get that than dealing with a junk yard. Multi use :).

can someone recommend a battery in the us for this welder?

this is border line genius :) i attempted some other method. but this imo is the must efficient i have seen so far. and easy to built. i'm making a copy for myself :).