Recent content by emaayan

one plus for toruqe sensor, but the problem is, that only torque sensor bb i know are thun's and the like and they all are 68mm :(

6000 rpm's hmm, i was sure it's gonna have way more... which is better.

well i believe the broken frame actually DID have longer chainstay , if i compare it to ritchey p29er xl which has 447 length, and venzo bike frame (unpacked down below) which has 450 long, the broken frame was 465, personally i would have liked 470, but have a true long tail is simply not...

there 2 problems, the first my original frame builder is no longer in the country so i can't exactly ship it to him, also DD says (i belive he's right) that entire geometry is messed up even the headset

no thud buster for me never again, :) not only because it shifts my position back, but all the new ones comes with 2 bolts configurations which makes mounting a b190 problematic, its' shame i know, but i'd rather play it safe and centered...

well it wasn't so much of a road bike but a trek hybrid,so i wasn't hunched forward. actually at work i usually don't hunch forward, but actually sliiiiiide back unknowingly till my head is below the seat rest. i don't notice it happening cause i'm so focus. i DON'T want to be leaned that way...

no, i don't want a frame rated 400lbs because i have no intention of loading 400lbs on it, as i've said in post above, the back contains usually nothing then a charger, bike cover and a towel. that's it, side panniers usually contain nothing other then groceries, i have no intention of loading...

the frame was already repaid with welding and after a year i've noticed a crack forming next to the weld, i took to a welder again but he worked on it for 20 minutes but even though he repaired it, he said it was too risky. Yuba mundo bike is shown to carry 2 kids, that's what i meant, but...

define "so much crap", for the electrical i have a mid-drive, 12 fet infinion controller and a 24.5ah 52 em3ev triangle battery, other then those i have: rear bag that contains a bike cover, charger and a towel. the bag under the saddle contains tire liner and inflation kit. the front...

are you saying i needed a long tail only because how far i've reached ? that will no longer be the case, having my seat in 71 degrees this far back made the brooks sitting angle very uncomfortable. which what forced my to go back even further. the new frame will have 73 degrees seat tube...

so about a year ago, my custom steel frame broke around the chainstay over here this was a columbus steel frame with supported several mid-drives around 1500-2000 watts, it rode for 2 years around 10000 km while there might several reasons to this (one being there were times i didn't...

well according to ritchey it was designed with 28/38/48 crankset in mind but i don't know what that means standards wise as this is the current chainring distance i have now i have now

https://ritcheylogic.com/p-29er-frame-black-yellow thinking about doing 1500w mid-drive on it... bikeradar review says the frame tends to flex on sharp turns https://www.bikeradar.com/mtb/gear/category/bikes/mountain-bikes/hardtail/product/ritchey-p-29er-review-51099/ one of the things i'm...

an9-i23mGqc

will i have a problem fitting a kenda 559-58 (it's 2.3 wide) tire on the current Montague rim?