Recent content by fabiograssi

The graphs are on page 2!

Broken link for me here...

This thread is about carbon fiber or about the bike? :mrgreen: Trying to return to the topic, who suggests something in million dollar question: - motor kv? - this setup has a motor reduction? - what is the chain reduction? - the motor sprocket has a freewheel? I just love this setup. We...

Picture:

Dear friends: I am using a 17s 1p in my GNG setup. I already have 3 bc168 charger (the same that hyena's sold to us sometime ago). I want to charge all the packs at same time, just looking for a connector choice, but it is not the case now. I am in doubt if I can use all the three chargers at...

+1. Luck mine, I always check that!

Be careful with your battery pack. With this pack, I think that is not a good idea push more than 2c, so 30 amps... * 36v, something like 1000 watts, what is very good for a mac torque version motor! You always can put a 14s lipos and push a little bit more, like 1600/1800 watts! :twisted...

Well, just for some kind of record here in the sphere. I drained the first cell of a 7s pack. Ordered a 4s pack to change this cell. Look at what I found: - Fabio

I don't think it is a 3rd gen. It is a brushed motor/controller (look at 2 phase wires only on motor). - Fabio

"Normally", sensorless controllers are "pedal first". I don't know how the ku65 starts the motor without initial movement! Fabio

Did you try pedal first until reach something like 8 or 10 km/h and hit the throttle after that?

You are correct, "problem" is what appears on LCD. I bought a 24v 17A meanwell clone power supply today and, at least untill now, the problem appears to be solved. At this moment I am with a 6s 5800 mAh in a lipo store mode at 1.5Ah. I will report after more tests! - Fabio

Excelent! I miss that in this thread? Thanks! Fabio

skyungjae: I have one kit, in use. Just trying to upgrade. The kit comes with one, but is crap. And I am running with 48v 40 amps, and my axle starts to bend. Because of the volts and amps I am running, I think I can use a bigger chainring for motor, to improve top speed, so I think this is...

In this page: http://bikemotive.myshopify.com/collections/ebike/products/freewheeling-crankset-for-ebike-bikemotive What is the best combo for the gng kit? And which model of central movement should I use with it? BR, - Fabio