Recent content by frederikmoeller88

Hi Guys! I just pulled my bike out of the (dry) shed. Its stuck on 26 watts, and when i hit the throttle it goes to zero. I can get working on pas for bit everytime i restart it. Wheel sensor works. I opened it up. No water no nothing. It does like this . But the connections are fine. Any...

Id did work wioth a low charge. Hopefully permanently! Well see what it does fully charged. Fingers crossed! Thanks for the input everybody.

Tried the cap method. Also shorting them at the plug. But no avail. Now it in the tester. Hopefully this goes :)

Ok im gonna try the cap discharge method first.

Yeah almost fully charged.

Hi guys So i got this 36v/48v kt controller hooked to a 500w bafang 48v hub. When i run it at 48v its great. But it stalls at 36v after a quarter turn. My bms is rated for it, and i tried multiple batteries. It seems like the controller is thinking its a fully charged 36v and a real low 48v at...

Isnt that normal? Thats how kt operates that i know :)

i tried my other display. Same fault. Im getting a new controller

Thanks amberwolf I tried clearing the caps but to no avail. I cant even reach the settings bc of the error code. :) I checked the phases on the controller and no shorts either to ground or positive. I tried testing the motor as well and its reluctant with the phases crossed so i assume its...

Hi i have a Bafang C965, A 48v 18a controiller and a hub motor. The display gives error 07H (overvoltage protection). But the battery reads just 50V so thats fine. Can i be sure its a controller issue? Can the motor somehow affect this error code? Kind regards Frederik