Recent content by fsmuggen

Hm.. Im thinking, mabe I should build a electric rickshaw, The "rickshaw" from hell, with dual drive controllers

The blue hooses are only covering the stainless steel braided brake lines, makes good protection against rubbing.. allso have the same tube for the wires going to the handlebar control buttons/display. I run everything with the max-E controller. I made the battery with doubble fuse system 125A...

Have anyone encountered problems regarding adjustment of charge current? When i connect my charger to the adaptto it starts charging at 30A no mater what my settings in the charge menu is. is there any secret parameters to adjust regarding this problem?

8x 15 samsung inr 25 120 cells 63v hot of charge 20ah 1260wh max

My latest creation is almost done..

I've been quiet for a while now, but Ive got into a smal issue lately, and I wonder if anyone here have some information or pics that can help me. My E-max realeased some magic smoke when I started charging. I now have had a look at it together with a another tech, the problem looks like a few...

Thnx Rix, I just set it up on 23poles. thought my cro motor v3 was 23, but when I checked the numbers in the setup it was 16. Still wondering about what kind of sidecovers to use, standard flat metalsheets looks a bit lame.. Mabe thin plexi plate, then Its easy to see if there is water seeping...

Okay, new project up running I at last I allso had to get a new project bike and ask Allex for a beta frame. kit. Plan is to make a medium street/ forrest runner for easy commuting with a 40-50km combat range. This bike will fill in the gap between the two bikes I have allready. The highpower...

I just want to share something that just happend to me. I got a new schwalbe crazy bob on my rear rim.. Totaly I have done around 30km on the tire when it popped of the rim while I was biking.. I was going less than 25kph so no damage was done. This could have been a serious case at high speed...

I'm working on forcing some wheight off the clamp pipe, looks better if it's not that fat..

I have a earthquake proof parking plate, roling on the floor works perfect every time..

this is from my display.

You should get a power inverter like this depending on voltage you want ->...

Does anyone know what the value of the resistor R59 in the controller? I cant find any value by mesuring it impossible to read on top of it too, I allso have problems with the display at charging, I can't move through the menu when I'm charging. (frozen) when charger is off everything is normal.