Recent content by grecoa

The new configurator release 0.3.8 is for firmware 0.19.... however I am also working for migrate buba's firmware to OEM displays.... but I will need some time. Hi marcoq I am very pleased to know that you are doing this new work and look forward to to testing the software. Thank you for all...

Hi grecora Thanks for the answer. Yes I select the box, but the resistance is still there. Not so much but it is still strong. Do you don't have such problems with the newest version? Hi I am using the latest version but I do not select (Last Beta Code) so still V18. When I select the...

Hello Sergio, did you select the box "Backwards Resistance Off" in the Java Configurator?

Good that it is working! The later versions that marcoq is working on has a fix for the Backward Resistance that you mention. Myself and others have been testing it for a while, there should be a new release of the marcoq code soon.

Hi Sergio I have not seen that problem. Only thing I can suggest is when programming the controller first off all make sure that you write all 0's to both the Program Memory and Data Memory areas using STLink. This will make sure that all previous code is removed before writing new code. I hope...

Hi Zelenaar The same symptoms have happened to me after trying to load a new firmware and I can only think that is because the firmware has become corrupted during loading. Not sure what they did during your service but it may be that somehow your firmware has become corrupt. The only solution...

zappan With your power settings how is the battery consumption?

Ashrambo For me version 0.18D feels like the motor is smoother, has more power and even is more quiet. But because many people said they did not like it because it did not need much pressure on the pedals for the motor to give assistance marcoq changed the software to V0.18E. For me it was easy...

Hi thineight Cable is from Aliexpress https://s.click.aliexpress.com/e/baRBtT1f

:bigthumb:

Here you go. I'd be interested to see what you get!

Hi Has anyone had problems with the wheel speed sensor? I find mine to be a problem. I know that the firmware will not give assistance if wheel speed is not correctly measured. I have had problems where at low wheel speed the displayed speed goes very high and I think there are times when signal...

Yes, all motors are using the crank arms supplied with the motor, so they are all same length.

elem I have done many experiments over the past days. With stock firmware installed I can use VLCD5 to show readings from the internal torque sensor. Using digital spring balance I measured Torque Sensor units for each KG force applied to center of pedal. 2 motors give the same values but my...