Recent content by Hilo

Yes, throttle works well at DM02

Riding on the road yesterday, without pedaling, the motor kept outputting until I turned off the VLCD6. Even after I replaced the battery, the problem came back. My bluetooth BMS can display the real current, I found that the current is almost 1.8A, and it always outputs this value. It seems...

I flashed version v20.1C.1 The motor keeps running without pedaling, as if the throttle is working, but I did not install the throttle. This is the second time, this time I am sure it is wrong. Fortunately, it can be stopped by the VLCD6 power button.

Yes, I understand, thanx for your reply

Hi Dears: I am using TSDZ2-v20.1C.1-VLCD6. Now I set only＂battery current＂ data display on VLCD6. That let me monitor battery current when I am riding at hill. But I found the ODO meter won't increase anymore, even enable or disable "Odometer compensation". Is my wrong configure setting?

Open source firmware TSDZ2-v20.1C.1-VLCD5-VLCD6-XH18 safety updates 3 - Eliminated potential mosfet risk in "save battery capacity". 4 - Eliminated potential phantom pedaling risk in "rx buffer". 5 - Changed "dead time" value to 1.5 us. Sorry, I am newbie. I do not know the aboves item. what...