Recent content by hjns

Hi Methods, If you still need the Cromotor, I can send you mine if you take the delivery costs + whatever you can spare. It's laced into a SAS HALO 24" rim, which might suffice for your purposes. KR, Henk

So, after more than one year with my PhaseRunner I also get some terrible faults, inhibiting me from riding my bike. Faults[0]: Controller over voltage Faults[2]: Bad current sensor calibration Faults[9]: Instantaneous phase over current Warnings[12]: HiSOCFLDBK Only when I completely redo...

OK, finally the holidays have arrived. We had a great Christmas dinner, and most people have gone to bed now, so I have time to write something here. In the meantime, I have had several days of experience commuting with the supercombo.. It is really great! My normal commute is a relatively...

Love your bike and the stories AWD, please continue to bring them!

Hi John, It's probably easier if you post all the specific characteristics of your battery, and CA and Phaserunner setting s,so other people can chime in as well.

OK, here is the breakdown. Warning: long post! Assembly I laced the Grin Hub into my 27.5 rim. After the initial mistake mentioned earlier, lacing was relatively easy, using 2.0mm black spokes with black nipples. Then I put a nice big DH tube and a Nobby Nick tire on it. In addition, I put a...

Hmm, for me the brake caliper has just enough space. I like black better than the shiny thing that I currently have. Might paint it black later. No holes in mine that I can see. Hmm. I usually put the bike upside down. For the current hubbie, I gently lowered the hub + spacers into the...

Hmm, I remember reading this somewhere. So, according to that picture, I laced my wheel the wrong way. Let's see how long my spokes will last.... :mrgreen:

Did you paint the motor black? Or anodized it some way?

I laced my wheel by feeding the spokes from the outside in. Therefore, all the elbows of the spokes are on the inside.

OK, I got everything laced in, assembled on my bike, and first test ride will start tomorrow. I have completely disabled regen, because I find that I cannot modulate the regen as I would like to on my front wheel. Too much fear of going over the bars.... Will tell you more after the test ride...

Hi AWD, thanks for sharing. I would be happy to read more of your experiences!

Wow, I feel your pain and had similar experiences importing stuff into Switzerland. I am really happy that my shipment from the US into Germany was painless. No additional duties or whatever. Very nice, very fast.

Yes, the spoke threader is expensive, but it is still worth it for me. I have laced about 30 wheels now (with and without motor). I got this Hozan one from Jenson.

OK, so I made a mistake. In my previous post, you can see how I configured the Online Spoke Calculator. I did it wrongly, hence the spokes that I ordered are too short. I only found out while trying to lace the wheel.... This is how I should have done it: In brief, I only selected [custom...