Ok thanks, but whats about the wattage? ... the big 1k Resistor is the recomended one from kelly! ... If capacitors draw some current verry fast will these small resistor hold that at 70V? .. I thought this wouldn't work long but maybe I am false!
Thanks!
yep; it is a little bit low; can't go faster then 10km/h just with pedalling. ...
... made a 9t bicycle sprocket by myself; this low gear ratio was just for testing!
.. will swich to a belt drive and a reduction of hopefully 10:1 soon! ... appart from that everithyng works great so...
5.6OHM seemed to be to less to charge the capacitors of the Kelly.
I think they would charge up to fast; this could damage them.
I also don't know how many watts the 5.6OHM Resistor has.
Also bought this connectors for my current build; have a 20S Battery ant Kelly Controller.
the required precharge resistor is 1K!
I opened up the XT90 and here is what it looks inside:
Yes; I use a freewheel crank and a reduction (1:8) so pedaling is possible.
I think Adam has a double fw on the LMX. Somethink like yours nutspecial.
Exactly! still have to test the bike.. But i think my design should work as I thought...
nope sadly not!;
I wish ich could do it like bzhwindtalker on his new LMX build!: I have a double bearing freewheel which is very wide; so i don't have the place to add another sprocket on the hub.
My setup is to drive the motorshaft and just use the #219 chain; should work well for just normal...
Yess Kelly KBS72121X. Its also small enough to fit in the front of the frame!
Test ride was at about 30A ... curious to run it more amps? don't know how exactly much Headway cells could deliver.
I think of 40A?
The Signalab BMS can handle 30A continious and 50-55A max.
Hopefully the next...