Recent content by Lowell

So who bought TSLA near $100 this year?

Why would you want to? Super 72 controller would make more sense. If the 11+ controller pulls over 35A then you'll be a little quicker acceleration but the same top speed. You have the 28Ah battery?

Luckily there are much higher priority issues for governments to deal with right now and they would likely go after the Sur Ron folks first. I've seen those ridden on sidewalks and bike paths here and nobody I've talked to has had any issues with police. The new local ABC government is anti...

https://youtu.be/JV6GaRv8IIY?t=63 https://youtu.be/X1gdUKtEHd8?t=389 Two different testers GPS verified 45 and 46mph top speeds which is very cool. Going from 38mph to 45mph requires 50% more power just based on aero drag. That can't be explained by the 10% power boost, so the MKGT must be...

Updates? Weather has been amazing here!

The stock motors are low kV so you can get more low end torque by raising the amps, but you will not get any significant increase in top speed. Charging and balancing is no big deal. I have a few chargers, but mainly using: https://ebikes.ca/product-info/grin-products/cycle-satiator.html...

3s packs in series with the stock battery for 79.8v fully charged will work with no other changes. Highly recommended and wakes up the mid and top end nicely. I've just started testing 24s on the stock controller (with 100v caps installed of course) and will update results here.

The Minimotors 27A controllers will handle 19s with no modifications. 23s after capacitor upgrades. The only thing on the scooter that doesn't like over 20s is the headlight. Horn, signals, brake and markers all work on 23s just fine.

-OwJsCeJKas https://youtu.be/-OwJsCeJKas Now on 23s after changing out the stock 80v caps for 100v, 135c caps. Motor brake rotor holes drilled for Statorade.

TS-100 65w with 450c firmware. 6s 4500 pack or whatever 6s FPV packs are handy for on the go.

https://endless-sphere.com/forums/viewtopic.php?f=35&t=115280 Have you considered a deck spacer and make it all battery underneath? External controllers will also cool better. Think Kaabo Wolf King GT.

I don't know anything about the wiring on your scooter, but these are a really good idea when powering up a new build: https://www.racedayquads.com/products/smoke-stopper-by-rdq-and-bengineeringlabs

Update: Avalanche voltage 112v, gate driver good to 600v.

Which VESC controller are you running?

What kind of 60fts are you getting? 1/8th mph?