Recent content by marcos_88

Can you ship the frame to EU ?

I changed all the hall sensors with HONEYWELL SS441A and everything works nice now. Even the hall angle test passed in my first try :) The voltages are the same, +5v on the yellow hall wire and about +3v on the green and blue wire, but considering everything works fine it may be normal. The...

The controller i got is brand new and it didn`t work from the start, it could be defective. But the seller tells me the 3-3.2 volt on the comunication wires from the hall sensors are normal. I get those reading with the sensors connected and disconnected, it doesn`t matter. I get on the yellow...

No, the motor is 2-3 years old. i upgraded only the controller and battery. It worked and it works with the old 50 amps kt controller.

Hi guys, I just purchased a Sabvoton 72100 and i cannot make it work with my setup. I get hall fault error even when i rotate the wheel by hand. If i try the trottle it moves just a little bit and than the same error. It doesn`t matter if i unplug the throttle, display, pas sensor and so on. I...