Recent content by Mark F

I replaced the supplied/installed shunt with this; http://www.altestore.com/store/Meters-Communications-Site-Analysis/Shunts/100A-100Mv-Shunt/p4637/ It works fine.

I also did not separate the boards. Here is what I did to remove the shunt.

Hi John, Like Adrian wrote the shunt/ meter wires are probably reversed. Try switching them. I just added a switch to my watt meter modification so I can switch between motoring monitoring and regeneration/charging monitoring. I wanted to be able to see current for regen. If it is set to detect...

Thanks for the help Jeremy. I know this is the E-Bike section but I thought I would post some photos of a Turnigy Watt Meter modification for my sailboat here. If it wasn't for this thread I would have never known to do what Jeremy did. I hardwired my meter so there are no connectors. The...

Hi Jeremy, Thanks for your back channel help. I'm still a bit in the dark. My electrical knowledge is minimal. I've got the Turnigy Watt Meter and want to mount it near the helm of my sailboat. This will require mounting the shunt remotely. I see the the photos of the removed shunt and...