Recent content by Meuh

100°C probe security cut-off does nothing ... a lipo warm stay at 55°C (max) for a 20C discharge. set the cut-off to 40°C during charge ... a lipo is cold when charge append and warm during "high" discharge (or at the end of capacity).

Current multiplication work specialy good on "long motor" (like HS crystalyte with 80-100v voltage). With a current meter on Battery, you can view that on start : - 20A battery = 50A on phases motor - if motor are on flat, the current battery raise to 50A when current on phases motor stay at 50A...

or ... you can build is simply like this : http://cyclurba.fr/forum/186031/creer-bms-partir-picaxe-equilibreur-autonome-plutot-lipo-alarm-integre.html?from=151&discussionID=9395&messageID=186652&rubriqueID=25&pageprec=

:mrgreen: well ... i can't output 480w in constant mode during 15km on a Q100-328RPM-24v overcloked at 42v. so, the Q100H can handle easly a 500w in "torque" mode usage (ON/OFF). they don't incluse the KTY thermal sensor on the "free white" wire now ... ? HURRY ! Like the CST ... the time is...

Yes, definively a wrong hall sensor / motor phase arrangment ... it's classic. For answer about a question for the setting of strategy of the throttle (speed or torque) ... you must set the parameter, finish completly the program of Kelly (it flash ONLY at the end, the all settings !) and...