Recent content by Modbikemax

Has anyone purchased ebike batteries from an Australian company LANplus? Good or bad? Web site http://lanplus.com.au/index.php?route=product/search&search=Ebike They don't look anything stunning but look reasonably priced for battery replacements on ebikes with failed packs. I am getting asked...

It would appear that simply changing the controller for one with a twist throttle is not as simple as it first seems. The motor has no hall sensors to detect phase angle even though the cables are there. There is a single hall sensor picking up a pulse once per revolution from a small magnet on...

If your connectors are getting hot you have a high resistance connection. A fuse will not protect against this. You need better connectors. This includes the resistance at the fuse connection. Bolt down fuses are better than push in fuses and gold plated connectors are better than zinc plated ones.

Here is the back of the LCD, as you can see it has sustained further damage getting it apart (not by me). Some wires have broken off. Note the blue wire comes off that large transistor which powers up the controller. The white wire probably came off pin "D". The yellow wire comes from one of the...

Here is a better picture of the controller. Note the small sub board on the right with the 3 hall wires coming out green, yellow and blue and no hall wires from the motor. The blue wire powers up the sub board on the left which is a small voltage regulator feeding 12v to the rest of the...

The wires to the LCD carry + red and - black battery power, blue powers up the controller that much I have been able to work out. The "ZF" and "IL" are the two connections I am not sure of. I might try a 10k resistor high and low to see if it has any affect. These LCD style interfaces are quite...

The LCD was dropped and damaged not by incorrect wiring note the broken screen. It is unusual that's why I'm asking.

Nice car!!

A friend asked me to attempt a repair on an "easymax easy bike". It has an LCD panel with only pedal assist and no throttle. The interesting thing is that only one hall sensor is connected and that goes to the LCD panel. The controller has a small sub board with an IC that has the hall wires...

Cree is just a brand like Coca Cola. There are many brands just as good if not better. The marketing department at Cree are just better at marketing their brand than the Pepsi version.

Just enough to run the air conditioners and water coolers. Maybe they should just try opening the windows to let in some fresh air.

Ive heard the Macs have a problem with sticking clutches. Tip the bike over and gently turn the wheel in both directions if you can feel the motor cogging in both directions your clutch is not working. Pay to check this before pulling things apart. 1000w has had some experience with this problem.

You don't see "Munted" in a thread anymore! Could be the chorus in a song. :lol: Seriously ID is not a bad idea but like helmet laws the cops really have got better things to do. Fining people never works, I see people running red lights and stop signs everyday and the threat of fines don't...

Could take the piss all day :lol:

Not confusing at all LockH thats why it says "Western Australia" on in2bikes Location. Pretty specific. Welcome in2bikes I think you will get lots help and advice here. Heads up, Old Mate has a few roos loose. Nice bike, needs a kick arse headlight.