• Howdy! we're looking for donations to finish custom knowledgebase software for this forum. Please see our Funding drive thread

Recent content by PITMIX

  1. PITMIX

    Conversion of a Bultaco Sherpa

    Hi, so where are you in commissioning your electrical kit? You had to connect only the accessories essential to operation such as the accelerator, the engine and the battery, without going through the motorcycle's electrical harness.
  2. PITMIX

    Nucular electronics - complete kit for ev!

    Thank you for your work, can't wait for the controllers to be easily available like the LCD displays.
  3. PITMIX

    KT36/48ZWSR-ff01 Hidden options

    Thanks for your help :bigthumb: . I think it's not worth bothering with this system. Better to take power directly from the battery and use a step-down dc/dc and handlebar switch. It's simpler and certainly more reliable. If you have any information regarding the engine temperature sensor, I...
  4. PITMIX

    KT36/48ZWSR-ff01 Hidden options

    It's likely that the options I'm looking for are coming from the display and not the controller. The LCD4 display does not indicate the ambient temperature, nor the motor temperature. It is also possible that the wire used to activate the front lighting is connected to the display. I think...
  5. PITMIX

    KT36/48ZWSR-ff01 Hidden options

    You read my mind that's exactly what I did last night but unfortunately none of the pending outputs on the controller seem to react to the lights on the lcd. Here is what I found, with or without turning on the light: N=38v G=0v S=0v H=4,5v X4=5v X5=5v X6-P2=5v X7-P3=5v X8=5v g=0v hv=0v sk=38v...
  6. PITMIX

    KT36/48ZWSR-ff01 Hidden options

    Thank you for your reply. Yes I already know all that but I would have liked to know if this controller can give 36v controllable from the LCD display. I use this function on another bike but there is a power wire coming directly from the LCD display. This is not the case and for the moment I...
  7. PITMIX

    KT36/48ZWSR-ff01 Hidden options

    Hello, I have just bought a KT36 controller and I have seen that the LCD4 display offers the lighting of the front lights but the controller is not wired for this. Do you know if one of the free terminals of the motherboard allows you to obtain 36v when you press the light with the LCD. Do you...
  8. PITMIX

    Conversion of a Bultaco Sherpa

    We wish you a good year and have a lot of happiness for this new year unlike the year 2022 for you.
  9. PITMIX

    Conversion of a Bultaco Sherpa

    That's not the power outage time but the hours during which they can occur. Power cuts will never exceed 2 hours. This is called load shedding we will be notified in advance if this is to happen. Power cuts only depend on the overconsumption of households and the severity of winter. So all of...
  10. PITMIX

    Conversion of a Bultaco Sherpa

    Yes I am optimistic and a 2 hour power outage doesn't scare me.I won't use a single drop of gasoline for so little
  11. PITMIX

    Conversion of a Bultaco Sherpa

    If there really is a power outage I'll play cards with the kids, and candle lighting. I think my daughter will love it.
  12. PITMIX

    Conversion of a Bultaco Sherpa

    Yes I think that for a power outage of 2 hours you survive without generator.
  13. PITMIX

    Conversion of a Bultaco Sherpa

    Can we expect to see your engine running before Christmas?
  14. PITMIX

    How to know the battery's charge level

    Yes it's a good strategy, if you charge 100% it's to use it immediately. If you need to store the battery it can be at 80%. Also avoid charging the battery when it is very cold. For a battery to last a long time, it should always be at its nominal voltage.
  15. PITMIX

    heltech bms help

    that's what i said above
Back
Top