Recent content by quadfather

Hey everyone. A very strange one last night. I had my usb phone charger lead charging my phone plugged into my ukc1 screen. o n the right hand side there's a USB with a rubber cover. You have to hold down the m button to send power to charge a phone. Or whatever. I pull my phone out, the...

I have tried exactly what you said but still can't get settings to change. It just reverts back to 150 battery amps and 200 phase amps. I'm sure there is a way if anyone knows please help. I've tried everything

Anyways, here's another video about the battery which was built by Insat international in the U.K. how much was the battery bud ?

ok people. have spent some time on the bike today. I think i have found the problem. upon metering the phase wires i have continuity between the live on the controller and the blue phase wire. according to this http://www.ebikes.ca/documents/BlownMosfets.pdf this indicates that the high side...

ive tried it without the cycle analyst even connected. the throttle runs through the controller not the cycle analyst. and i used to be able to use the bike with no cycle analyst connected. i'm going to check for shorts tomorrow, if theres no shorts then i'm completely lost

hey andy, yeah i suspected the same but i have metered out everything, i have tried with and without the ebrake connected (i ran my ebrake through the switch on the handlebars as i have upgraded to hydraulic 4 pot hopes) cycle analyst powers up fine. upon first connecting the controller its...

hello people! haven't checked in for a while. life has been busy for the last few months....... my e-bike has a serious problem and i CANNOT fix it. it all powers up fine but will not move. ive tried a new controller, a new throttle, new switches still to no avail. i suspected the motor. so...

I've just fitted 19 x 2.75 shinko sr241 tyres and the clearance is tight. just about fits. the 3" definately wouldnt fit either on the front or rear. Hope this helps ?

Good work pal! totally agree on the stand. i find myself kicking it with my heel when i'm riding to make sure my crank arms don't hit it. As i've done a few miles on the bike now. (probably about 800) and had a few questions here and on my previous youtube video, i thought i'd do a little Q+A...

yeah you need infineon 3 (EB318) i had the same issue. good luck pal

your phase amps are well low, you can go like 2.5-3 times your current. my current xpd set-up is 68.4amps max draw (although still will draw just under 100 on cycle analyst im going to lower it further) and my phase amps are at 203.8 now thats a wheelie machine! i also noticed that my enduro...

i though this same thing, BUT if you change the settings on the cycle analyst to high instead of low, the cycle analyst will go over 99 amps. up to 990amps lol i felt stupid when someone else told me this. the only difference now is your wattage is in kw instead of watts but easy to work out

hey, i have an enduro ebike and the chain keeps falling off! its really frustrating when i pass evryone then have to pull over to put my chain back on. On a short ride today (15 miles) i had to put the chain on no less than 5 times!! i have bought this chain guide but its pretty useless...

what computer are you using ? which version of windows ? use the xpd software the thread is here, much more user friendly and more adjustable settings https://endless-sphere.com/forums/viewtopic.php?f=2&t=27927

nice mate! you can carry that up the stairs ???? Are you superman ??? lol