Recent content by sfiii

Conventional wisdom states that Lithium Iron Phosphate cells should not be charged over 3.65V per cell. However, the 3A Chinese battery chargers that came with my LiFePO4 batteries charge my 36v 10Ah batteries to 3.71V per cell. It is a generic lithium battery charger, not specific to LiFePO4...

I replied to you but did it wrong so just a little note to let you know to look at thread and fell free to comment further if you like. Thanks for weighing in already!

Well one of the two motors that Justin sold me has always made a weird sound everytime after it warms up a little, and I have had a problem with the two motors not putting out equal power always since the beginning of this new getup in 2018, much to my annoyance (veers slightly to the left)...

on the first comment re:bms, please elaborate. in regards to the motor cable suggestion, if this were the case, why did the system work fine with my back up pair? Additionally, even 5 days later after the failed set had been recharged, the Phaserunners still 'recognized' these batteries...

joneyjoe303, It is quite possible that my cheap Chinese chargers are not doing what's optimal. I DO have a single Cycle Satiator and could be individually topping off and balancing packs to a custom maximum. I have not yet broken into the pack to see if the cells are currently balanced...

Okay, I've got the puzzle for you! I"m an experienced e-trike builder, been doing it since 2006. I keep a detailed log so buckle up. Current set-up: one power main goes to 2 Phaserunner motor controllers to 2 hub motors. I generally run off of a pair of LiFEPO4 bricks at one time. They run...

I see a lot of talk about self-driving cars here. There's an awful lot of positive 'spin' on the IOT but I think we can agree here in this ebike forum tjat simply using LESS energy solves an awful lot of problems. How many of you have considered the energy cost of the IOT (especially...

TommyCat, yeah I saw that item on a similarly-themed thread. People complained about it not being weatherproof, but that sounds like a not-insurmountable problem. Thanks for explaining what the little wires do. If the remote switch I just installed fails (or i lose the only remote {: o ), that...

In case anyone is interested, LockMasters just pointed me in the direction of a different Pollak switch than I was already aware of, 31-499, which is the same size as a standard automotive switch but rated to 40A continuous! That's beefy, folks. If you have a large enough vehicle to care...

fechter, I have two controllers and they are hard to reach. Some have switches so one wouldn't even need to unplug them. I also don't store it for a long time, I drive it nearly every day. But yes, all advice would be appropriate to a less complicated set-up

Cute box on the trike! I like the upgrade

amberwolf, as you can tell, I clearly have no idea how to do this forum thing correctly! { :D I have seen those isolater switches everywhere, but I'm designing a product, not just a one-off, so I can't imagine this sort of a clunky generic key being a selling point for future buyers. If...

Which cutoff switch are you using from Harbor Freight? Just curious. And what are you running at? What's your top Amps output? The 'solenoids' I have been looking at have 4 connectors. I actually think I DO need what golf carts are using. And the run of the mill ones are actually not so big...

amberwolf Oh my goodness, I didn't remember posting before, and about the same problem, and now there are so many wonderful replies to that thread which I will now review! When I wrote 'most switches', I mean't 'most automotive and scooter key switches.' I see a few on the market that are 24V...

Hey there! This is actually my first time posting! I build Electric-Assist Tricycles. They currently draw up to 50A continuous at 36V. I have been using automotive switches (and before that, e-scooter switches) for my 'frankentrikes' (www.frankentrikes.com). My current rated 12V 35A...