Thank you all for the help, i was able to figure out issue, it was stupid, but helpful for any other one who get this issue later on. So the existing display had the kickstart enabled and when I was testing the throttle I was testing with the wheel not moving. I rotated the wheel and pressed the...
There is a power button on the display to turn on the display, which works as the display turns on (and it can read voltage), the odometer on the display is zero, but nothing is spinning so nothing should show on the odometer, is there a way to test it? I suspect that the controller is turned...
Yes they are sensorless 3 wires only, green, blue, yellow. I believe that the controllers too are sensorless. I opened the exisitng display and find the wire that is not connected to anything, it is labeled DMS on the display board. What is DMS for? (I will edit the post with a photo to)
I have a dual motor scooter, the original controller died and I received two new controllers to replace. However the wiring is different, please see the image attached. Where would I be able to find the wiring or manual for this controller, there is A and B controller. The display and cable from...
I have secondary rize battery 52v, purchased separately, this is an addition not the main one, It was in storage for about 6month and it was never used.
My plan was to use this rize battery for another ebike project that I am working on. However i discovered that rize use their own plugs, which...