Recent content by SweKen

Doesn't work. Redbull will do the trick!

Gotta love methods wild style...subscribed.

Typing from my phone. I've found 6s packs that fits two side by side. They're narrower than the typical zippy. It's the welded nuts inside the frame that takes up the extra space isn't it? I can't remeber the name of the lipos but they were yellow and from hk.

Really nice!

Just for comparison where i live in Sweden its 1.55 SEK/Kw that equals 0.23 American cents for one Kilowatt. Tht includes tha taxess and stuff. And we consume abot 13000 Kw per year, fifty percent in winter due to the heating pump, fifty percent in summer due to a swiming pool pump. So it would...

Make it in carbon fibre, its lightweight, easy to work with, and dust it with a clear coat to get the looks. :-)

So, have you solved the issues yet? :-)

Did it happen when you where accelerating or regenerating? If i was going to use this kind of method i would probably drilled two holes thru the plates and thru the drop outs, fixating them with stainless recessed hexagon heads, with the nut facing outwards.

Now i really need to decide, i guess they will start geting bored with my, "do this, oh no wait, do this, oh no go back again, do that". Since i have no clue but the speed in Grins simulator its very hard to even know what im chosing between. I used to race 1-cyl dirtbikes of 450-500cc, and ive...

Well, let me put it this way. They do have a cromotor at their shop and they will make it fit, they say its gonna be tight and 3/16-1/4' offset to the right and it would require some dishing to center it. They will need some extra dollars but its no biggie. NOW what do you guys think? I cant...

But how tourque is it in a 26" wheel, does it powerwheelie? Hows the acceleration, good, great or really great or mindblowing? I do like the fact that it gives a bit more range than the cromotor. Butnthe cromotor is also faster at the same volts... Decisions decisions decisions.

I've been in contact with methods, and I will probably go for his advice on the 3525 and go for his controler. He's one helpfull buisnessman :)

Guys, you almost convinced me to go for the ht3525 now, but just almost. How would it performe on 100v and 100amps? Fireball in five minutes?

We then should have had some kind of "test batch shipping discount" :wink: Ive just emailed them about making my dropouts from 135mm to 150mm to fit a cromotor, in the first email they did advice me not to fo down that road because of the mass of the motor and that the frame was not...

Makes me nervous, im on the other side of the planet from where they make those frames, it would be heartbraking if it was damagednupon arrival. :?