Recent content by user27

Since it seems hard to find; here's the English 16s ant bms manual with wiring diagrams: Required passwords: My one... Still currently lights out no leds, no sound, but no magic smoke released either.

Good link! I'll be saving that for future reference! Seems like adding 2.8mm to search finds them. Cheers edit: Confirmed those connectors fit; search for 2.8mm terminals found them.

Maybe these, although it doesn't say what they are? http://electricscooterparts.com/whitewiringconnectors.html I'm going to order these 2.8mm ones below and hope they fit; was hoping there would be a brand name like "molex" or "jst" that would work to search for the correct thing but neither...

Fair enough; I figure I'm keeping more than have the components; maybe now that I have had to change the wheels it's a salvage and rebuild situation! It is my understanding from working with IT stuff that these are molex; square pin into square tube: ...and indeed searching for molex on...

Is that so, where do you draw the line? Presumably the electronics is all conversion stuff so it stopped being a conversion for you when I changed the frame? Any guesses what those plugs are called so I can stock up? Thanks

I figured 27kw was motorcycle; 5kw isn't going to lift the front wheel with a fat bloke on the saddle right? So what size cog do I put on the front?

Which two or three gears? I'm assuming that I'll run the battery flat or blow something up at some point such that I'll want low gears to get the heavy beast back to base. Then something high geared to actually contribute at 5000w speeds? Already made the spacer and bought the freewheel so...

Hooked up some little RC lipo packs in series for testing; but the motor is with the guy who's building wheels etc for me so I can't actually test it yet. Nothing went bang or let the magic smoke out though. Should have the cells, bus bars, and BMS here next week to start the real 16s 40Ah...

This post seems like good info regarding NB motor seller; also recommendation to do what I'm doing in that it's best to buy a motor alone and get it built locally with a good name brand rim and spokes. https://endless-sphere.com/forums/viewtopic.php?f=3&t=112206&p=1660970&hilit=NBPOWER#p1660970...

Thanks for reply and good info, I did check the spec a bit since I have some minor brushless RC experience to know I should look at kv number. Also it is here... And I opened it.... But you're wrong about one thing I'm afraid... I still have no idea what I'm looking at! Got some legal...

I was casually looking at ebikes after a friend got a 1000w one recently. I have a pretty decent spec hardtail that I built using a bulletproof nsbikes jump frame a decade ago; I was living near mountains at the time and I didn't want the bounce of full suspension on the way up them; also...

I have much the same situation; not sure how the individual controller information helps but I'll provide it! I appear to have the one wire as per most reasonably high amp MOSFET boxes I can find. I got it from EVFITTING just because they have been around for years with 90%+ feedback unlike...