Search results

  1. grindz145

    Opportunity Charging in the UK/Belgium/Holland

    Next week my wife and I are heading to Glasgow to start a month-long ebike journey throughout the UK. Though I have had great success opportunity charging throughout the US (see my 2014 trip), I suspect that this will be considerably more difficult in the UK and Europe. We'll be riding two of my...
  2. grindz145

    First dead Hall Effect Sensor - 14k miles

    So after priding myself as a man who takes care of his hall sensors, and yes, perhaps even bragged about it from time to time, I have finally ended up with a dead one. 4 years, 14k, and a world record later first dead hall sensor. :twisted: :twisted: Interestingly, it has failed such that it...
  3. grindz145

    ISO Bicycle Standard Motorcycle Disc Brakes?

    Unfortunately, I am not offering these, rather I would like to identify a solution. I need something much stronger for my Puch Magnum project. I am using a hub with bicycle standard ISO disc brake mounts. I have tried some of the most intense bicycle brakes (Hope mono V2s) and they're just...
  4. grindz145

    Ebike/Moped Gang Cruise Video

    Tongue in cheek fun with the Sons of Apathy :D https://vimeo.com/108753338
  5. grindz145

    4500+ Miles US Ebike Tour - August 2014

    So I guess I'm getting closer and closer to actually doing this. Here is a very vague plan: The idea It came to my attention last year that the world record electric bike journey was at a mere 2500 miles. I knew full well that Justin had done more than that on his cross country Canada trip...
  6. grindz145

    Your Response needed - Ebike Survey! - Win $50!

    The deal: Fill out the survey here!: http://troyrank.com/?p=2177 The survey is 5-10 minutes, and should be kind of fun if you're at all interested in ebikes, motorbikes, EVS, Pizza, living forever, etc... :mrgreen: The progress bar is pessimistic and it goes faster than it really suggests. As...
  7. grindz145

    What do you want in an ebike? - Participation needed

    Help Evolve Ebike Design! Share your pain. http://emotorbikes.ideascale.com/ Over the past 5+ years that I've been a member of this community I have seen thousands of post relating to wishes/needs/gripes/and general brainstorming from the most qualified group of electric motorbike mavens in...
  8. grindz145

    The Revival - Puch Magnum Build

    This thread is a continuation (rebirth) of this old thread: http://endless-sphere.com/forums/viewtopic.php?f=10&t=43620&p=825811&hilit=revival#p825811 The Concept: Minimalist transportation - We've all been building "ebikes" for a long time now, and for the most part they are using...
  9. grindz145

    The ultimate onboard charging solution

    After spending several years with crappy hobby / questionable chinese quality charger setups, I decided enough was enough: My new requirements for charger: -Onboard, automatic, simply plug into the wall and walk away. -82-84V - >350W -Constant current -Hands-off (no explodey) -Waterproof! (no...
  10. grindz145

    Galaxy Note 2 Ebike handlebar Mount

    I had this wicked handlebar mount I installed yesterday. It looked a little weak, so I epoxied it together to make sure I wouldn't lose my $600 phone. On my way home, the 2nd time I used it, my phone popped out. I turned around quickly, only to see it get run over by several cars... I'm...
  11. grindz145

    Ebike Touring Adventures

    I thought it would be cool to start a thread to share some of the adventures I have, while touring around on my ebike. Long range ebike trips are nothing like any other form of bike travel. 2013 Electrathon / Green Grand Prix Part 1 I was able to take last friday off as a volunteer day, in...
  12. grindz145

    Elon Musk's - Hyperloop

    "a cross between a rail gun and Concorde." I Just heard the keynote with Elon Musk for SXSW. He was asked about his idea for a "hyperloop" which is some sort of terrestrial form of transportation, which cannot crash and is not affected by weather, but it somehow not a train. Can run on solar...
  13. grindz145

    Shwalbe Super Moto Bicycle Tires

    I've heard of these before, but I'm getting a little bit tired of my hookworms (though I love them) They're a little bit too soft, and they tend to get eaten up by road-junk. I have 3000 miles on them or so, and while the front holds up just fine, the rear is getting punished. I wonder if I will...
  14. grindz145

    Controller Connector Manufacturer/PN

    Hey guys, I'm trying to get the correct crimp tool for use with cycle-analyst/Ebikes.ca standard controller connectors. What is the manufacturer part number for these guys? I feel like it is some kind of molex/JST/samtec type connector but I haven't been able to pin it down. Can anyone point...
  15. grindz145

    Where to get 9C Motors?

    It doesn't seem like many people are stocking these anymore. I think the 9C would work really well for a friend who's building a bike, but I can't seem to find them under $350. Does anyone know anyone who has stock of these 9X7 at around $250? Thanks!
  16. grindz145

    Perm PMG 132 Reverse Brush Configuration - Brush "timing"

    So I have this gorgeous Perm PMG 132 courtesy of Methods. However my design has changed a bit, and I'd really like to use this motor on a left hand drive bike. Since the motor is designed to be a clockwise turning motor, this isn't going to work as is. So my question is: What exactly determines...
  17. grindz145

    Mission Motors ditches Motorcycle Production Goals?

    Just went to the Mission site for the first time in a few months and noticed that the mission bike is no longer the end goal, but rather a "Technology Demonstrator" It looks like they're selling components now instead of the whole bike. This is pretty cool, because there are specs from all of...
  18. grindz145

    Xtracycle Snow Powerslides, Gangster Remix

    cross post from my sport-tourer thread: gMu0xl1Z0dg
  19. grindz145

    Electrapalooza - May 11-13 2012 - Maryland

    Looks like a bunch of guys have piggy-backed on the solar expo in may of this year, and are having some EV events. Check it out here: http://electropalooza.wordpress.com/
  20. grindz145

    AST CDS150 500W to 32kW Water Cooled Industrial Motors

    Just stumbled across this on google adsense of all places. The largest motor looks pretty nice. It's a little on the heavy side, but 74Nm torque is pretty respectable. I've sent them a request for a quote. Would be nice to have a curve datasheet too. http://www.astli.com/cds_series.html
  21. grindz145

    Sevcon Programming

    I'm leaning toward building a brushless, big-motor bike as my next project. The main problem is that even though the Sevcon controllers seem pretty amazing, but the programmer is a grand. Is there anyone that provides a service to program these? Any ES hobbyists have one of these bad boys? I...
  22. grindz145

    Rochester Institute of Technology-Electric Drag Race

    Title says it all, BUT you have to be a student. Any takers? http://www.rit.edu/news/story.php?id=48678 I fully intend to take this one home (since I'm a part-time grad student WIN). Still trying to decide on approach though... :twisted: :twisted: EDIT: Did I mention $1000 prize purse, or...
  23. grindz145

    Trek 1.2 Lightweight High-power hybrid-unlimited pedal range

    So I've been doing this whole Electracycle thing for a while now, and it owns. I love my ebike. I love having 3kwh at my disposal. I love that I can load 60 lbs of gear without batting an eye, and I love real acceleration. However, what I have with that bike (as most of us do) is a fast...
  24. grindz145

    Scott's F/S Giant Build Thread

    And no, I'm not Scott, this is a build that I've masterminded (I don't think he'd mind me saying so) that we've just started. Props to GC for all of his datapoints. Nothing terrible fancy, just done right, for a buddy who's new to ebikes, and I want to start him off right :twisted: :twisted...
  25. grindz145

    Trek Ride+ Battery teardown

    So I was lucky enough to stumble upon a trek ride+ ebike battery. From what I understand this is essentially Trek's ebike platform. They're using a 11s4p configuration sony konion cells. The cells were at 0V when we pulled the pack apart. I suspect the Battery Protection actually killed the...
Back
Top