• Howdy! we're looking for donations to finish custom knowledgebase software for this forum. Please see our Funding drive thread

Search results

Date Relevance Most replies

  1. oatnet

    This item has been successfully donated

    I have (3) a123 packs built from 20ah 'amp20' cells that I'm unlikely to use again, free to a good project. All are old, amateur-designed/engineered/built, and priced as such (free). (1) 20s1p pack in a pelican box with clamps for mounting to a Rockshox Boxxer double crown fork (refer to...
  2. oatnet

    Manual for Bafang 01EKD-B02N Bluetooth Display for BBS02/BBSHD

    I picked up another BBS02, and this time I chose the 01EKD-B02N Bluetooth display. When I tried to research the display I couldn't find a manual online, so now that its here I thought I'd post pictures of the 2-pager that came with it to make life easier for the next person. I'm not sure that...
  3. oatnet

    FREE: (96) 10ah 10c PSI LiFePO4 cells/holders

    Currently arranged in (2) 36v/30ah 12s3p modules and (1) 24v/30ah 8s3p module, but the lego cell holders let you rearrange them into any serial/parallel you want. Previously used in my VW Bus conversion. 12s3p module weighs about 28lbs. LOCAL PICKUP ONLY Los Angeles Area
  4. oatnet

    NEW a123 20ah 30c cells, agnuism packmaker kits NEW

    . . a123's AMP20 LiFe cell is the perfect combination of high discharge, fast charge, low thermal load, high capacity, and long cycle/calendar life. They have have a very low IR, and are rated at 30c/600a (10 seconds) and 10c/200a continuous. a123 rates the AMP20 for 3,000 cycles to 100% DOD...
  5. oatnet

    Will a BBSHD interfere with an ISCG-05 chain guide mount?

    I've been contemplating another BBS build, but noticed the frame has an integrated ISCG-05 chain guide mount which I'm pretty sure will interfere with the BBS HD's motor can. My searches are not turning up much data, has anyone run into this and what did they have to do? Assuming it does...
  6. oatnet

    Motobecane Moped to Mars Motor adaptor

    . . Keep checking back, I'm freeing up storage, I'll be adding pictures of more treasures I find! -Motobecane Moped Motor mount for Etek/mars -- $75 -SKS Chainguard --$10 Domestic USA only, buyer pays shipping/paypal, Local Pickup available. -"Farfle" heavy-duty rear swing-arm for the...
  7. oatnet

    SoCal slow speed vehicle network for ebikes and NEVs

    http://southbaycities.org/sites/default/files/Metro%20Slow%20Speed%20Network%20Study.pdf This is wonderful, it makes me so proud to be a Californian, I hope we can implement it. On the beach paths you can clock a few ebikes passing every minute, people commuting from Redondo Beach to Playa Del...
  8. oatnet

    Fiat 500e Frenzy

    After building a few electric cars (and motorcycles and ebikes) here, I finally bought my first factory EV automobile, a Sky-Blue Fiat 500e. These are only sold in California and Oregon, so if you don't live here you might not have seen one in person. I have a few data points indicating that...
  9. oatnet

    Today I am 10 !

    I was thinking this was my 10th anniversary on E:S, but when I looked closer, I realized it was only my 9th. I probably thought that because started playing with BLDC wheel motors in 2006, but didn't join E:S until 2007, shortly after it started. Thanks to everyone on E:S for the EV Grin and...
  10. oatnet

    Beach Cruiser - TF IO frame, BBS-02, 14s2p Samsung 30Q pack

    I've been wanting to try build with a BBS for a while, but my Dune Buggy project was sucking up all my time. Besides, I already have a ton (literally) of long-range ebikes, and the pre-3077 BBS controller seemed to need sorting, so the idea has been on the back burner. The Electric Dune Buggy...
  11. oatnet

    Crop-picking EV

    Stumbled across this, it isn't really transportation, but an EV with utility I had never pondered before so I thought I'd share. You lie flat on your stomach, and this kart moves along the crop bed so you can plant, weed, and pick without having to bend over. Looks pretty slick to this city...
  12. oatnet

    Unboxing thread - KITTAZ-4 3d Printer Kit

    I have wanted a 3D printer for years, but the technology has been advancing so fast, that whatever I'd buy would be obsolete in weeks. I've been drooling over the ebike parts and cases that people here have been building, but I just couldn't pull the trigger. However, the kit version of the...
  13. oatnet

    A New Health Insurance Scam - Accident Victim, beware.

    A few weeks ago I had an accident on my e-Moto, and afterwards I went to the Emergency Room to get checked out. The ER visit was covered by my Health Insurance, with a modest copay. I've been expecting the typical billing process, where the Hospital charges a ridiculously inflated amount, and...
  14. oatnet

    1,000lb "Elec-tow’d” Electric Tow’d Dune Buggy Build Thread

    Meet the “Elec-tow’d” Electric Tow’d (pronounced "Electrode", but with an Elmer Fudd accent) You may remember the thread on my Electric VW Bus conversion (CLICK HERE), which I built in 2009 and sold last year. I will be bolting-on the 9” DC motor, 180v/500a Kelly controller, and 175v/60ah...
  15. oatnet

    19,000 members!

    User danielrlee joined E:S at 6:30am today, and became our 16,000 member. :shock: Hard to believe how much this forum, and hobby, have grown over the past 6 years. Thank you Justin, for preserving this site! -JD
  16. oatnet

    ONDA Cycle

    I almost want to buy one just to electrify it - slap a front 5303 in a 20" rim, and one of my pelican front-mount packs. All the weight would be over the front wheel, point and shoot. :D http://www.kickstarter.com/projects/994460154/the-onda-cycle?ref=category
  17. oatnet

    EcoTrak - An EcoSpeed Middrive/Ktrack Snow+Sand Bike

    The Ktrak kit consists of (2) Quick-Release replacements, a ski that replaces the front wheel, and a complete track assembly that replaces the rear wheel. The rear track also has a shock absorber assembly that clamps to the seatpost, and keeps the track's three smaller wheels in the correct...
  18. oatnet

    Stolen Electric bike - Ashland, OR

    Not mine, but Jerry from Ashland Electric Bikes is the guy who bought out the last of my complete Tidalforce S-750 frames, and has been making/selling ebikes based on them. I just got an email from him, reporting that this bike was stolen from in front of his store:
  19. oatnet

    Converting an SX2 Mini Mill to CNC - build thread

    I'm converting a mini-mill to CNC, and I wanted to create a build log.  I thought about putting it on CNCZONE as yet another X2 conversion, but since it is intended to make ebike parts anyhow, I decided to put it here on the sphere instead - in the spirit of nechaus' "makerbot" thread. There are...
  20. oatnet

    A Conversation With a Scammer

    I got a call today, from a guy with an Indian accent so thick that I could barely understand him. He said he was from Microsoft, and that they were getting messages from my computer saying it was infected. Obvious scam, but I decided to play along and see where it led to; plus it gave me...
  21. oatnet

    Another take on the electric bike...

    uf05DjlDNnE
  22. oatnet

    Random Files: photos of a 6-seater

    I mostly liked the shadows from the chainline, but what the heck, I'd electrify it: Do 2 shots of indoor rainbows count as double-rainbows?
  23. oatnet

    Fanwing

    I want to make one. asJqvrikQSA
  24. oatnet

    Volkswagen's levitating car?

    Ew4Y5HLyT6c
  25. oatnet

    High Current Schottky Diodes?

    In the early days, I used an ebikes.ca product that joined two packs together, and prevented one pack from charging the other. I think it had an upper limit of 45a, Which was way more than people were running in 2007. IIRC, it used Schottky diodes to do this. I just put a 60a 179v a123 pack...
Back
Top