Search results

Date Relevance Most replies

  1. E-Norco

    GNG, 1000W 48V BB-drive, $400

    Has anybody mounted the kit on a bike with pressfit bottom bracket?
  2. E-Norco

    GNG Bike - Norco Six / Giant Team DH

    Hello Noamsal, i have the GNG gen 1 kit but i think that motor should be the same. My topspeed is about 60km/h (vary depending on gearing) at 2200w adjusted in Cycle Analyst. The 72 volts are no problem my motor only get handwarm. Maybe you get trouble with mounting the kit on your Frame because...
  3. E-Norco

    GNG Bike - Norco Six / Giant Team DH

    Hello dusan, i think we talked about different things. As bottom bracket for the crankset i use 148mm ISIS BB. The BMX BB i use for the jackshaft.
  4. E-Norco

    GNG Bike - Norco Six / Giant Team DH

    Hello dusan, i machined a bushing with BSA thread where i screwed in the bearing cups. The freewheeladapter at the primary side is fixed and for the position from left to right i cutted spacers and used an old ahead cap to adjust it. I think bmx bearing cups are better than Shimano BB because...
  5. E-Norco

    GNG Bike - Norco Six / Giant Team DH

    Now i finally improved my jackshaft with BMX bottom bracket and 3/4 inch keyed shaft. I have also installed a new freewheel on the primary side and upgraded the secondary to 219 Kart chain.
  6. E-Norco

    LightningRods mid drive kit

    Christerljung has solved the torque twisting problem on page one of his thread: http://endless-sphere.com/forums/viewtopic.php?t=46113#p675513 I like the way LightningRods goes with the kit.
  7. E-Norco

    GNG Bike - Norco Six / Giant Team DH

    Here are my latest Updates: The bike still runs great. I replaced the 26inch rear rim for 24 inch Spank Stiffy rim. Now the bike has a better acceleration and the steering angle feels better. My chainguide is working now. No chain drops for over 100km offroad riding. I added the Kelly thumb...
  8. E-Norco

    Show Us Your Homemade Battery Housing

    Hello, this is my GNG-Giant Team DH with custom battery box.
  9. E-Norco

    Giant DH Team GNG 60v Build

    Hello Matthew, have you made some progress?
  10. E-Norco

    New freeride project - LMX P1

    Matching Grip: http://www.motorradparts24.de/fahrgestell2/lenkung/griffgummi-zubehoer/griffset-magura-720019/a-5137625/
  11. E-Norco

    New freeride project - LMX P1

    5k Throttle http://www.motorradparts24.de/fahrgestell2/lenkung/lenkerarmaturen/gasgriff-komplett-modell-317-magura/a-5137571/
  12. E-Norco

    GNG, 1000W 48V BB-drive, $400

    http://endless-sphere.com/forums/viewtopic.php?f=28&t=46891#p686506
  13. E-Norco

    GNG motor noise

    Hello, can you please post the bearing sizes? Thanks!
  14. E-Norco

    GNG Bike - Norco Six / Giant Team DH

    Here are a few recent pictures: This week my new 12Fet Lyen Controller and the Lightning Rods upper sheets arrived :D Today I installed everything and tomorrow's test ride!
  15. E-Norco

    GNG, 1000W 48V BB-drive, $400

    I want one too. It might be better to set up a European and a North American group because of shipping and customs costs.
  16. E-Norco

    GNG Bike - Norco Six / Giant Team DH

    Thank you sigimem! The range varies between 15-25km depending on whether it is hilly or flat. I am still trying different throttle settings on CA V3.I'm still not satisfied yet. How to use it with Magura throttle...
  17. E-Norco

    GNG Bike - Norco Six / Giant Team DH

    Since i converted the front chainring from 38t to 42t i use the middle and the upper gears mostly. I prefer offroad riding but to get in the wood i ghoastpedal with a little throttle support. What is WOT?
  18. E-Norco

    GNG how fast is yours ????

    -18s 2P Lipo 9FET Lyen-40amps -range is about 15-25km -no pedaling off-roading
  19. E-Norco

    Banshee Chaparral with GNG gen 1.1

    I have 6x 6s 5000mah in my triangle and mine is 12cm wide too. I think its okay.
  20. E-Norco

    GNG, 1000W 48V BB-drive, $400

    But it's not so easy to find good settings. I am still testing a lot. I use Magura Throttle, 9FET Lyen, Cycle Analyst V3 at 18s 2P Lipo. If anybody has reference points from a similar setup please let me know. Thank's in advace!
  21. E-Norco

    Electric downhill/freeride bike

    I ordered a A1301EUA-T hall Sensor and try to build a shifter thumb throttle to decide between this and my Magura. Is it important to use stainless steel or can i also use aluminium for the internals?
  22. E-Norco

    Banshee Chaparral with GNG gen 1.1

    Looks very nice!
  23. E-Norco

    Giant Comp DH bolt on build

    Very nice Bike!
  24. E-Norco

    1.375 X 24, ISO 6696 thread standard, 2008

    White Industries Website: http://www.whiteind.com/free-wheels.html Information from Tartybikes http://www.tartybikes.co.uk/complete_freewheels/white_industries_eno_trials/c16p77.html Description: "- Uses 1.375" x 24 tpi thread. Please note that this is slightly larger than standard 1.37" and we...
  25. E-Norco

    GNG, 1000W 48V BB-drive, $400

    In the description from the ENO it seem to be different sizes... http://www.tartybikes.co.uk/complete_freewheels/white_industries_eno_trials/c16p77.html
Back
Top