Search results

Date Relevance Most replies

  1. M

    Europe Part Supply!

    I've contacted a supplier (by coincidence the same as boosted boards!) and they can supply belts real cheap, about 8 EUR included shipping in europe! But i have to order in bulk, would the interest be high enough? HTD5M - 265 9mm AND 12mm width
  2. M

    Europe Part Supply!

    Hello! When i started getting into electric skateboards it was quite difficult to find good and cheap resources in Europe, especially shipping (I'm located in Belgium). Now i have found a good supplier i might be able to set something up to get cheap drivetrain parts to other people in europe...
  3. M

    Support on my 10S BMS

    Are you using it for charging only now or discharging as well?
  4. M

    Support on my 10S BMS

    Correct me if i'm wrong On this guys, i'm wondering as Well.. Since the ESC has a low voltage cut off wouldn't it be enough to Just use the BMS for charging only, that way you can use like only a 10 amp, cheaper, BMS. So Just connect the esc straight onto the batteries. And the charging port to...
  5. M

    ABEC clones

    Hello, I contacted a seller in china for the ABEC clones. I wanted to buy some on eBay but shipping to belgium is 20-50+ $. I have to buy quite a big amount.. Would there be any interest for this? And at which price. 90mm diameter
  6. M

    EZRUN 6S Build log

    Got up to 30kph for a quick run :D Any thoughts on removing the fan from the ezrun 150A esc?
  7. M

    EZRUN 6S Build log

    Yes u used a file to get to 15,1mm. Then with a belt of 220 grid sand paper i sanded the grooves out and for a smooth finish i ended with a strip of 600 grind sandpaper
  8. M

    EZRUN 6S Build log

    I set everything up today, programmed the ESC and went for a run. Too bad it was raining all day long. With the bad weather i didn't for full throttle but it has a good amount of power. The belt slips a little when braking hard, i think due to the fact i'm using 9mm width. Maybe i'll go for 15mm.
  9. M

    EZRUN 6S Build log

    Hello, I'm a student Engineering in Ghent, Belgium. To get to school everyday i wanted to try something different. I decided to build an E-board. The idea came long ago and did some testing but never really worked it out. But this week I don't have class and decided to start the build. First...
  10. M

    |Campus Rider MK I.5| Weld-free Electric Long Board

    Really nice build, as far as i can read. Too bad i can't see the pictures
  11. M

    Built in charger

    Would a cheap ebay charger or something else be a safe solution. Onze with auto cut Off. Something line this...
  12. M

    Built in charger

    And if i would switch to 18650 later on i could still use this right? I currently have LIPO so i don't want to buy a new battery yet
  13. M

    Built in charger

    http://www.ebay.com/itm/Protection-Balance-Module-BMS-PCM-21A-for-6S-22-2V-Li-ion-Li-Po-battery-6S21W004-/221809115255?hash=item33a4da8077:g:WhYAAOSw0JpV5rfV BMS like this?
  14. M

    Built in charger

    http://www.ebay.com/itm/21-6V-22-2-Li-ion-LiPo-Battery-Charger-25-2V-2-5A-Auto-Stop-Intelligent-EUT5521-/321106187542?hash=item4ac36b9516 Something like this in combination with a BMS?
  15. M

    Built in charger

    Any good recommendations for a 6S BMS? -LIPO
  16. M

    Built in charger

    Why wouldn't it be possible with a lipo? If i make 2 xt key loops, one for power and one for charging mode..
  17. M

    Built in charger

    I'd like to have a board i don't have to open every time.. So i can make a case that bolts or screws on the board, it wouldn't be easy to take it of every day
  18. M

    Built in charger

    But you would still need to have a charger and supply, or a charger with built in supply. But they have all the buttons and lcd and are quite large compared to a simple laptop supply
  19. M

    Built in charger

    Hey guys, To charge a diy board on the go you always need to open the case, disconnect the battery, connect to the charger and balance leads,... You also need to have the charger+power supply. To charge it on the go and take the charger with you in a backpack its a real hassle. I was wonder if...
Back
Top