Search results

Date Relevance Most replies

  1. burner77

    CYC PHOTON

    Yes, CYC… I will make a new video, when the stock version is out
  2. burner77

    CYC PHOTON

    Sorry, I had to remove the video… since it isn't the stock version. Means it will be even better
  3. burner77

    Grin Phase Runner / CA3 and BBSHD

    ASI BAC
  4. burner77

    Grin Phase Runner / CA3 and BBSHD

    Connect the programing cable and check what the software says try to run it sensorless
  5. burner77

    XPD: open-source keywin e-bike lab replacement

    Does anbody know which profile has to be used with the 24 fet 4115 EB624? I can find it just for 18fet max. Thanks
  6. burner77

    GNG / CYC X1 Pro 3000w

    better to have somebody with a lathe. The axle and the thread have about 0,2 mm difference, which gets bigger and bigger with every acceleration. A thread is never that strong than a even metal. There are plenty of adapter for the BBSHD, you can use them. But the motor will be pressed to the...
  7. burner77

    GNG / CYC X1 Pro 3000w

    you are the best. You can also use your skinny wife. This is one test over 10 and there is not only one option. And not every customer knows how to add a extra controller and want s to run by stock to have warranty. Some like to pedal more and do 100 km trips. Or don't have a battery which can...
  8. burner77

    GNG / CYC X1 Pro 3000w

    it is the 13S controller, which also runs with 14S I don't have the 20S controller yet
  9. burner77

    GNG / CYC X1 Pro 3000w

    finally I found some time for filming and editing: https://youtu.be/YkjWWj9loX4 After a few improvemts in firmware and few testrides we compared it to the BBSHD with shut mod. Pretty impressive for his size and definetely more torque!
  10. burner77

    Grin Phase Runner / CA3 and BBSHD

    Grin is now offering a ready to go harness for the BBSHD a have ordered a few and took a few pics how it works for all interested in: moderator removed this link- it did not contain what it claimed
  11. burner77

    Grin Phase Runner / CA3 and BBSHD

    BBS02 is already on the limit with 25A the robust controller is useless, if your motor is too weak go for a BBSHD
  12. burner77

    Grin Phase Runner / CA3 and BBSHD

    I had melted Anderson 45 phase connectors with the original 30A I would suggest some other connectors, like 4 mm gold or also the MT60 for phase
  13. burner77

    Grin Phase Runner / CA3 and BBSHD

    Go for the CA3-DPS. The speed signal goes into the controller and you remove the original controller, you need a new speedo, which is integrated in CA3-DPS
  14. burner77

    How To, 50A BBSHD Controller Mod

    you had to remove the Ludi pics?
  15. burner77

    Grin Phase Runner / CA3 and BBSHD

    Thanks, can you post you complete configuration file of the Phaserunner, please
  16. burner77

    How To, 50A BBSHD Controller Mod

    Thank you for all the helpful info. About my previous display question: DPC14 is made by APT display, what about DPC18 made by Bafang? Is this really a problem of the display or the controller itself? The question is, if the display DPC14 shows a lower voltage using a voltage dropper resistor...
  17. burner77

    How To, 50A BBSHD Controller Mod

    Just to make a summary after reading everything twice. For a 50A mod replace the 2x 5 mOhms on the rear side of the PCB with 2x 3 mOhms (Width: 3.18 mm Length: 6.35 mm, Height: 0.35 mm). Power can be lowered in programming software, for example 24A = 40A Mouser WSLF25123L000FEA original display...
  18. burner77

    Grin Phase Runner / CA3 and BBSHD

    would be nice Reinhard! And great work as always… what we also need is a proper setup than. If you could post your experience with settings would be great! I have got some basic info from Justin directly: there are two ways of tuning the PR to a mid drive like the BBSHD system. Either you look...
  19. burner77

    The Crown vs 24 inch Rim grrrr

    get a MXUS 3K 3T, which is better and cheaper always a problem lacing a TC
  20. burner77

    Grin Phase Runner / CA3 and BBSHD

    would be nice to get a full setting list, since we can organize the parts by our self. Seems that ERT let wait his customers for months. And I know I'm not the only one to be interested… Thanks
  21. burner77

    Ultimate BBSHD Grin Phase Runner FOC 3000W

    How about posting all the used settings of Phaserunner and CA? Since I already have Phaserunner, CA and BBSHD… would be great. I think I'm not the only one. Thanks
  22. burner77

    Adaptto Mini-E/Max-E Owner's Thread

    Adaptoo has regen and it is nice to use even as a brake. If you live in a flat place it isn't worth regarding energy. Even in the mountains it is hard to regen more than 3% of the total energy consumption. You could use a extra throttle or semething like this...
  23. burner77

    My Bafang Ultra Mountain Bike! Frey AM1000

    Yes the one on the pic is different, I haven't see any price for that, but I have got a email if I'm interested. The one I have tested wasn't constant in power in the flat, it didn't pause, it is because of the torque sensor or some other issue. The full power was available, but only when...
  24. burner77

    My Bafang Ultra Mountain Bike! Frey AM1000

    The concept looks interesting and there a different ones around from China, all pretty similar. I have got a email today with a cheaper version of it. See attached pic. I had the chance to test the bike you have ordered. From the motor feeling is pretty different than a BBSHD. While with the HD...
  25. burner77

    Adaptto Mini-E/Max-E Owner's Thread

    could somebody help me out: my Adaptto stopped working, after I left it ON for 1 week. It was turned ON because of balancing and I forget to shot the controller off. After 1 week I wanted to drive again, but the display was off in the ON position of the lock. No chance to turn it on again...
Back
Top