Search results

Date Relevance Most replies

  1. quickshot23

    Cannot find Infineon USB Software

    Thank you very much for your insight modified the settings today and all is well besides the fact that I need to get a torque arm : )
  2. quickshot23

    Help with controller settings, bike is slow

    Nevermind - I got the d/l to work I will mess with XPD and see what I can do Thank you
  3. quickshot23

    Help with controller settings, bike is slow

    Im all about trying this software but every time I try the links it shows it is down Could you send me the files to install?
  4. quickshot23

    Help with controller settings, bike is slow

    I found where I read it - it is from the "read me" file with the software from em3ev Any idea what I should do with this? Note: I set the battery current to half of 40 (20a) and it was very sluggish
  5. quickshot23

    Help with controller settings, bike is slow

    Awesome info - One final question: I heard somewhere that the rated current was supposed to be half what it is actually...? So If I want 40a I set it to 20a? This sounds odd but I dont want to set it at 40a and actually have it trying to pull 80a Did I read wrong? Do I set it to actual...
  6. quickshot23

    Help with controller settings, bike is slow

    I am not sure how my FETs compare but these are what I have: IRFB4110 Mosfets I like your idea of setting a high LVC and seeing where the actual voltage is and I will do that today What do you think I can set my phase and rated current to based off those FETs? Thank you God bless
  7. quickshot23

    Help with controller settings, bike is slow

    Thank you guys First Question: Battery limit going down - I always am safe with the numbers and because lipos can be pulled down to around 3v per cell, I gave a 2v comfort zone to be safe - 36v would be 3v per cell, 38v is 3.16666v per cell. Second question Block Time: I understand block...
  8. quickshot23

    Help with controller settings, bike is slow

    I have a crystalyte 406/4011 running on 12s (44.4v) 10,000mAh I *had* it on a generic 28a controller but after the shunt mod and during a hill climb I blew it I knew I needed something stronger Now I have the 12fet 45a customizable em3ev infineon controller seen here...
  9. quickshot23

    Cannot find Infineon USB Software

    Okay, I have software - New question My em3ev controller has 6 AWG wire (if I am measuring correctly) The software says to rate the amperage at 2.0 - 2.5 X the current of the batteries I am running 6s batteries in series for a total of 10,000mAh 44.4v 20C Constant What should I set this...
  10. quickshot23

    Cannot find Infineon USB Software

    I bought the em3ev Infineon 4110 seen here: http://em3ev.com/store/index.php?route=product/product&path=38&product_id=82 I have searched and searched and found links to various software but all end up being a dead link or software that wont install Is there any working links or can someone...
  11. quickshot23

    Advice and Recommendations needed please!

    I would guess he meant for the battery connections on the controller, no? I agree with dogman, the wires for the motor can be reversed. (in the RC world we reversed wires when the car/trust would be running the wrong direction, again as dogman said)
  12. quickshot23

    High quality E-brakes, E-throttles, E-shifters

    This is not an answer to your question, but what controller are you running?
  13. quickshot23

    T-boned by a deer

    yikes, glad he is able to talk about it -The Value of a good helmet
  14. quickshot23

    Pop goes the 1420 ( My fault )

    What died - the charger or the battery If it was a thin gauge wire, you likely shorted something that may be easily replaced Forgive me if I misunderstood God Bless
  15. quickshot23

    crxguy52's golf cart motor controller

    This is going to sound like a newb question but... Did you design that PCB and if so, how do you get it custom made? Thanks
  16. quickshot23

    Currie ''peak'' review

    Nice bike - a bit pricey (but I am comparing to building your own so not really a fair comparison) Good to see you found something that fits your needs and gets another person into this awesome hobby : )
  17. quickshot23

    Advice and Recommendations needed please!

    Take a look at this: http://www.ebay.com/itm/CS-36-5-36V-300W-500W-brush-motor-controller-for-Electric-bicycle-scooter-NEW-/251483035083 I believe the reason yours is different then the standard is because your hub motor is brushed as opposed to the current brushless hub motors The controller...
  18. quickshot23

    The Build, Trek Pure, Bafang BBS01, progress

    Maybe its just me (and a few others ; P ) but I was happy pedaling at about 20mph - then when I added e-power I hit 30mph, and now I want more and more! I guess I (and we) just have an innate need for speed : )
  19. quickshot23

    Help with sorting out wires on generic controller

    Nice, a bit too powerful for my needs but nice controllers : )
  20. quickshot23

    Help with my new Front Wheel Motor

    Absolutely, use them : ) Because Nimh have moderate voltage drop you may find your throttle cutting out due to the LVC Let me know what I can do to help : ) You can see my build in my signature that shows a similar build but instead of Nimh I am using Lipos
  21. quickshot23

    crxguy52's golf cart motor controller

    I love arduino : ) I am not this advanced but what you are doing is awesome Keep at it - I look forward to the end result : ) God Bless
  22. quickshot23

    Help with my new Front Wheel Motor

    From the sound of the setup you will need at least 24v for the controller You have stated that you have a bunch of 7.2v batteries I assume by this voltage notation that you have Nimh batteries (1.2v cells in 6 cell packs) This type of setup is not optimal but could be used At full charge...
  23. quickshot23

    Drive my Tesla Model S - Electric Car Guest Drive in Calif

    Aww too bad im in PA or I would be all over this : ) Very awesome!
  24. quickshot23

    First Time Rear Hub 48v Build

    Ordered the http://em3ev.com/store/index.php?route=product/product&path=38&product_id=82 Should see some nice torque upgrades with it and it will be able to handle my higher voltage and better motor when that time comes : ) Should be getting within the next week - will update with pictures...
  25. quickshot23

    Amps, Watts, and LiPo -- help us understand please ...

    Modding cheap controllers can add great benefits but if pushed too far, you can fry the controller I had a 28a BMSBattery controller and soldered/copper wired the shunts and after a few rides the controller died I just bought a 40a controller so I should be seeing better torque and less...
Back
Top