Search results

Date Relevance Most replies

  1. L

    Adaptto Mini-E/Max-E Owner's Thread

    At full speed pull 160-170A but my battery sag too much... 8P of Sony Vtc4 maybe is too little, i need maybe 10P for pull 170A and less sag
  2. L

    Adaptto Mini-E/Max-E Owner's Thread

    New settings, at 170A battery and 380A phase, flat road
  3. L

    Adaptto Mini-E/Max-E Owner's Thread

    Hallo Guys, i want show my settings of my Max-e with 20S 8P of SONY VTC4, at 150 battery amps and 380 phase amps... I see under full throttle and full speed battery drop at 67V constant, and controller pull 150-165 continous batt amp, maybe with more parallel i can go more fast, but Cromotor go...
  4. L

    Adaptto Mini-E/Max-E Owner's Thread

    Thanks for info Madin, when i finish the test with all possible parameters i post the results! :)
  5. L

    Adaptto Mini-E/Max-E Owner's Thread

    Thanks for settings Artur... You have less amp than me... I think is impossible with Adaptto go more than 20-30A during regen I will continue with test
  6. L

    Adaptto Mini-E/Max-E Owner's Thread

    Thanks Artur... So we have a instruction manual with big mistake, because talk about "Angle correction2 and PWR timing2", for Active braking, and sure not for slave controller.... I think Adaptto have to correct this on the manual for better understanding!! :)
  7. L

    Adaptto Mini-E/Max-E Owner's Thread

    Thanks for answer Artur, so in the manual is write wrong, because talk about anglecorr2 for the regen section.. So the parameter of the regen for push more, maybe is power timing 2? Or even this is for slave controller?
  8. L

    Adaptto Mini-E/Max-E Owner's Thread

    Doc, please can you tell me all paramenter of your regen settings? I have a doubt about angle correction2, after autotune is always at 0, in manual i read is part of the tuning of active regen, so i believe in forward if i change this value dont make difference, but if i go forward and move this...
  9. L

    Adaptto Mini-E/Max-E Owner's Thread

    wow Artur, almost locking rear wheel is my dream, and Doctorbass at 80a is incredible good!!! Me with 80A battery recharge settings, active mode on, and 350 phase regen current, dont go over 35-40 regen, and sure dont lock the wheel... I have a cromotor, so is enough powerful for strong regen...
  10. L

    Adaptto Mini-E/Max-E Owner's Thread

    Ok...more more strong regen i have to use ACTIVE REGEN function, and i can see 40A regen and more strong brake effect! I know is less efficient, but only with active funcion regen become more strong Thanks to all
  11. L

    Adaptto Mini-E/Max-E Owner's Thread

    Hallo guys!!! I have a MAX-E 10Kw model, i try to set the most powerful regen, 70A battery side, 250 phase amp regen, active mode ecc... But regen is always too weak, only 14-15 ampere when i push for example at high speed like 100kmh... no more than 14 amp is possible What i can do for...
  12. L

    Compact Field Oriented Controller, ASI + Grin, limited run

    FLUX-ONE SINE-1 FLUXTRON FLUXOR VEC-1 PHASE-X :D I want clear one!!!! Wonderfull
  13. L

    Kelly VS Adaptto--- Speed run

    I hope VTC4 can last many years, because for me is more important calendar life than cycle life, because i use this pack for fun and not for commuting every day... If i can do 3 full years with the same power and maybe 300 cycles im happy :D
  14. L

    Kelly VS Adaptto--- Speed run

    I really love the Adaptto, smooth powerfull, and is incredible what can do on only 72 volts!! SONY VTC4 is very powerfull cells, i have a 28S 8P pack on another bike with kelly kbl, and after 1 year and 100 cycle is like new! I can put out the same whr of when i create the pack! :)
  15. L

    Kelly VS Adaptto--- Speed run

    Hallo guys, this is a little video of me and one friend when we are test 2 different system Green bike with Kelly KBL 120V 250A and 28S Nanotech lipo, Cromotor V2 9Kv Blu bike with Adaptto and 20S 8P of SONY VTC4, Cromotor V2 9Kv With 100V and 150A battery side Kelly put out 15Kw, and...
  16. L

    Warning!!!**Do not buy Sabvoton Controller**!!!!!

    Hi guys, im sorry that you think i have some interest to talk bad about customer service of Sabvoton, but i try only to ADVICE the community to be careful with some people and some company. People are free to believe me or not, this not my problem. And for who said i try to solve my problem with...
  17. L

    Warning!!!**Do not buy Sabvoton Controller**!!!!!

    Hi Spinning.. You have true, but is not only problem about local dealer or local product, because in my life i buy many things from many place in the world, and the difference is from PERSON, not from where you take the products. In my mind come now the Adaptto controller, and especially...
  18. L

    Warning!!!**Do not buy Sabvoton Controller**!!!!!

    Hello everyone, I wanted to inform all users of the forum, and I think it is also important to write this warning on other forums of electric vehicles, to tell you about my horrible experience with SABVOTON, and in particular with Mr. Paul Chen, head of the service with customers. About 2 months...
  19. L

    Adaptto Mini-E/Max-E Owner's Thread

    Hello everyone, I am writing this post to tell that I have become a happy owner of a wonderful controller Adaptto, controller that I find really cool, and it really shows the difference with the classic square wave that drives the motor so bad !! But above all to thanks Allex, for providing a...
  20. L

    Hallo, to all, i see some people there use Sabvoton controller,

    I read all post of Alan, thanks, but maybe my controller have some problem... I do all in software and i connect all right wire, but regen seems dont work, if i can, today i test on the road and look whats happen
  21. L

    Hallo, to all, i see some people there use Sabvoton controller,

    Is the rate of throttle slow dow, the ramp down when you release the throttle
  22. L

    Hallo, to all, i see some people there use Sabvoton controller,

    this is my setup, i use Cromotor and i have this diagram for connection I try to connect Purple wire-High brake to 5+V , and i see on the status bar in the real time sowtware appear ELEctronic brake, like the brake start, but the motor only stop to rotate, withouth regen, like stop rotate when...
  23. L

    Hallo, to all, i see some people there use Sabvoton controller,

    Hallo, to all, i see some people there use Sabvoton controller, i have Sabvoton 48V80A SSC version, (Square) I start to become crazy with regen, i set slide brake in software, electric brake ecc... But regen dont work, wich wire i have short for start ebrake? I suppose "high brake" on the 5V+...
  24. L

    Qulbix 165/140 Raptor /NYX Carbon - Sabvoton/Adaptto - 20s/22s Build #5

    Very very nice project!!! Can i ask you where you find your mudguard? Thanks
  25. L

    AGNI or ME0913

    All people with all system have problem at launch, start power, with kelly controller! Kelly give you power only when your motor spin more fast, but if i have electric system is because i want Torque\power at 0 rpm not like gas engine only in some little rpm zone! I think if you want powerful...
Back
Top