Search results

Date Relevance Most replies

  1. S

    EEB upgrade to coaxial swingarm @48v???

    I did some research and my battery is good for 100a continuous draw so using the 80a controller should be about 4300w on a full charge. It looks like the drive side has a 32 tooth front and 43 tooth rear. I am assuming there is some reduction built into these motors? If it turns a similar...
  2. S

    EEB upgrade to coaxial swingarm @48v???

    Update. The motor is smoked. An upgrade of some sort has to happen I guess.
  3. S

    C&N EEB 1500w very little power

    . Agreed. Sounds exactly right. I took it for a ride today and fried the motor on a big hill. Apparently there is no overheat protection in these. The windings and wires inside the motor are smoked. Melted wire ties everywhere. It is a mess. I made another post about replacing the hub motor...
  4. S

    EEB upgrade to coaxial swingarm @48v???

    I have an electric enduro bike with c&n 1500w motor. It doesn’t have enough power and now I got it too hot and it has a lot of drag and shows an 07H error. I don’t like the weight of the hub motor either. So I am trying to find a solution other than selling my damned near brand new EEB and...
  5. S

    C&N EEB 1500w very little power

    I had to program the pedal assist for counterclockwise rather than clockwise for it to work when pedalling forward. Not sure why it is like that. Backward sensor, swapped wires, wrong PA sensor???? Still no throttle power to speak of. Voltage at throttle is 3.8v. Wondering if the controller...
  6. S

    2013 BRAMMO Empluse R

    How long does it take to charge from empty to full? Are you in a huge hurry to get it sold? I am in NY and would need some time to make travel plans. I would gladly send a deposit if we make a deal. Also, these have a title like a regular bike right?
  7. S

    C&N EEB 1500w very little power

    The pedal assist is now working and it seems to have plenty of power for playing around on the road. Will see about off road. Throttle is still useless.
  8. S

    tidal force m750

    That battery should work fine. I used a very similar battery on mine. I went with LiPo for the X model.
  9. S

    C&N EEB 1500w very little power

    It is certainly made to be noticed. But then again, around here, any ebike gets noticed. I live in a small town where most times I roll my Burley Canto ebike into the Walmart and lean ot against the wall with very little concern about it being there when I get back. This bike is so damned...
  10. S

    C&N EEB 1500w very little power

    Well I don’t know just what I did but the pedal assist is working now. At least on a stand. Seems to have lots of power and runs up over 40mph easily. Contacted the original owner and it turns out he put a different throttle on the bike to match the rest of the red accents. Not sure if that is...
  11. S

    C&N EEB 1500w very little power

    Now I see I am getting an occasional Error 01H. I am not sure if it is random or from me wiggling a wire with a loose connection. I haven’t been able to repeat making it go on or off with anything so I am pretty sure it is not a loose plug.
  12. S

    C&N EEB 1500w very little power

    I just purchased a second hand C&N EEB. It is the 1500w fat tire model. The battery was very dead when I got it but luckily it has taken a full charge and seems ok. It is a 48v 64ah pack. I have verified that the battery is not my problem by connecting my 14s lipo pack for my other bike to it...
  13. S

    EEB with BBSHD advice

    Another question for the same bike. It is a C&N model EEB. Is there a hub motor that will work with the 48v system that will give me ridiculous hill climbing torque and a max speed of 30mph with 26x4 fat tires? Thanks again!
  14. S

    EEB with BBSHD advice

    Hey All, Been out of ebikes for a while and I just bought an EEB with a 48v 40a controller and 1500w hub motor. I want to know if anyone has experience swapping the hub motor for a BBSHD and running it with the controller from the EEB. I don’t think the hub motor is going to cut it...
  15. S

    Trial riders need their clutch?

    Pretty sure he means flywheel, not freewheel.
  16. S

    Trial riders need their clutch?

    Excellent post! Thanks!
  17. S

    Criminalizing e-biking

    The guy who made this video is an idiot. He is spouting off about laws he has no clue about. In New York State that electric scooter can get you in just as much trouble as a dirt bike on the road. Under NY law that is classified as a motor vehicle regardless of fuel type and is required to be...
  18. S

    02 Jamis Dakar Comp mid drive choice

    Thanks Dave. I have been reading through those posts. I know now to use the + button if I need more power in PAS mode. It’s still a very dangerous setup. The bike is like a 40 pound 2 stroke dirt bike with a sticky clutch cable. It’s on or off and you don’t always know exactly when. Lol I am...
  19. S

    02 Jamis Dakar Comp mid drive choice

    I hate the throttle on the bbs02! The range of control sucks and the programming sucks worse! Using pedal assist, wanted a bit more power so tried the throttle, no response, more throttle, no response, stop pedaling saying what the heck, full throttle, bike loops out, I go on my back and lay...
  20. S

    02 Jamis Dakar Comp mid drive choice

    Put a 30 tooth front sprocket on. Holy shit! It climbs anything as long as you can stay on it, keep traction and the front wheel down. Slow speed throttle control is much better and pedal assist in 1 and 2 are now useful instead of being way too fast. Now let’s hope the Jamis holds up or its...
  21. S

    02 Jamis Dakar Comp mid drive choice

    Brakes are dragging. I think the calipers are sticking a bit. Figure that has a lot to do with the squirrelly handling in the mud. The front is the worst. I will service the brakes and try again when the weather is better.
  22. S

    02 Jamis Dakar Comp mid drive choice

    Got the backpack all set up. I have my Kilowatt frame bag inside the backpack. Only using one side of the Kilowatt bag allows me to use the straps and another to make it very compact and provide excellent protection for the batteries. Didn’t get a chance to ride much but I did notice a few...
  23. S

    02 Jamis Dakar Comp mid drive choice

    I put the cassette together with the biggest (32) spaced out so the chain line is almost perfect. I have the derailleur adjusted so it won’t shift into the smallest of the cogs but have yet to be able to get it to stop before going past the big one without paying attention. I did end up just...
  24. S

    02 Jamis Dakar Comp mid drive choice

    Been working on the bike here and there. The bbs02 fits quite well. It required a 2mm spacer to keep the chain ring side of the drive from hitting the rear suspension mounting bolt. Now it just touches. The 42 tooth Lekkie bling ring is pretty close to the chain stay. Will have to keep an eye...
  25. S

    Bike tool set

    Picked up a Pedro’s universal crank puller. Works great. Grabbed a Shimano cassette tool and chain whip as well as a spare master link and a wealth of knowledge from the LBS owner. Was more expensive than online but the advice and helping a local business made it a bargain. Thanks Martins...
Back
Top