Search results

Date Relevance Most replies

  1. G

    Hill Scooters' Scooter

    yes good point, I only implemented front regen brake out of necessity because the scooter only had 100mm dropouts up front and regen in the rear was a very fine balance between barely slowing me down and the rear tire skidding/ hopping unless a shifter my weight back to the point i am almost...
  2. G

    Hill Scooters' Scooter

    if you are only looking for 20's for top speed, and want dual motors, have you considered some geared hub motors? lightweight, and more torque than direct drives. i see you mention the gmac's, maybe get a freewheeling motor for the front? trying to turn with a clutchless motor is less than ideal...
  3. G

    Supermoto Tires Like Motorcycle for Stealthbomber?

    how are they different from "regular" moto rims?
  4. G

    Leaf / leafmotor / leafbike high efficiency 1500w motor

    qs205 50h axle weighs 664g vs 300g for a low end ~1000w hub motor axle. i dont have a crystalyte axle to measure, but i would assume its heavier than an axle from a $90 ~1000w hub motor, which is only a 364g difference to the qs205 axle. anyone know where to buy an H+55 motor? all their us...
  5. G

    Free: Stalled (but mostly complete) Motoped High Power Conversion Project - Reno NV

    Wow, that is a beautiful build. It's too bad im all the way on the other side of the country. I'll paypal you $1,000 if you would be willing to ship it.....ill even send updates when it is completed.. It looks like there are half a dozen bike shops in Reno that work with bikeflight, just drop...
  6. G

    Nanjing far driver controllers

    theres a guy on one of the facebook groups that has been archiving them on google drive,i think 1.3.7 is in there https://drive.google.com/drive/folders/17K1ILh-IekDZlz2ZEMyxLLreL_TSe8y7?usp=drive_link
  7. G

    Vector bike and frame owners.

    i havent heard from them since jan 16, but the headset just showed up today via dhl, so at least they came through there. albeit 6 months a 1 day after i ordered the frame, but lesson learned i suppose.
  8. G

    Thread for new battery breakthrough PR releases

    Ahh i see mooch tested them about a week after i found out about them. Makes sense, as they are marketed towards the vape community, that they wont be a fan of continuous use at higher current.
  9. G

    Thread for new battery breakthrough PR releases

    I just noticed listings on 18650batterystore for 6000mah and 5600mah cells. No inventory though. Havent seen anyone post testing of them or anything. Thoughts? Vapcell F60 21700 6000mAh 12.5A Battery I feel like this is going to be true for a while, ditch the FOMO, buy one and enjoy it.
  10. G

    GNG email address

    i bought one a litle over a year ago and just checked my email hostory, and yes, it was gngelectric@hotmail.com that sent me tracking info, ect.
  11. G

    new cyclone 3000 w mid-drive kit?

    the wobble is from the freewheel. i havent dug into why, but i would guess the bearing races are not machined parallel, so when the freewheel is engaged, it does not do it, but if it is freewheeling, it wobbles. Pretty much all cheap freewheels do it, even little razor dirt bikes and scooters do...
  12. G

    Vector bike and frame owners.

    ahh, i still needed the races and everything else , i found this, 1.5 to 1 1/8" adapter Amazon.com it arrived today and fits perfectly, for anyone else that is looking. on day 6 with no response from Vector, guess it would have been another 2 months anyways (thats how long it took them to...
  13. G

    Vector bike and frame owners.

    I know this post is 2 years old, but did you ever get the headset or figure out which size it is? Im in the same boat right now, ordered 4 months ago from vector, missing several components on arrival. Contact has been very lacking, they just sent me the rest of the missing parts and this is the...
  14. G

    Anyone familiar with this ML7280 clone?

    These controllers are not worth modding anymore when you can get a $90 vesc (makerbase 75200) that can do more, and is a fraction of the size. I used half a dozen or so for random builds, modded a few of them, wasted a lot of time. Got regen brake on one but it would randomly apply sometimes...
  15. G

    Ford/Chevy using BW HVH250-115 hairpin motor

    I know this threads old, just figured id throw it out there for anyone interested in a cheap source for these motors, there are 2 inside of the 2ml70 transmission, found in 2008-2013 GM 2mode hybrid trucks (tahoe, suburban, yukon, escalade, ect), most of which are non operational at this point...
  16. G

    Advice on big wheel e scooter?

    Battery is attached in a couple of the pictures, on the down tube. Ive tried it up high and down low, definetly keep it as low as possible. Hose clamps and rubber hose to mount so i could easily swap them out, as this was used as a test mules for several batteries. You probably could put it on...
  17. G

    Advice on big wheel e scooter?

    Very nice! I bought all the materials to build one but havent found the time yet, still designing the rear suspension, which is taking longer than i thought. so in the meantime i picked up a crussis cross that is much more comfortable for long rides, but you cant just whip it around like the...
  18. G

    Advice on big wheel e scooter?

    The ospreys are pretty tough, i beat the heck put of one for a year or so, 35h hub up front with a votol em30 set to 40A. I jumped it, sunk it in mud, id guess 75% of its life has been off road and/or WOT. That being said, its like a bmx bike comfort wise. If you are crouched down a bit with one...
  19. G

    What makes these cheap Chinese chargers so dangerous?

    Charging at 50% will absolutely, 100%, NEVER cause any damage whatsoever to a lithium battery. You Got a junk battery. The ones sold on amazon are the exact same as the ones sold on Aliexpress, just more expensive because someone is buying them and storing them over here for faster shipping...
  20. G

    SOLD Cyclone Coaxial 2-6kW Mid-motor + Controller + Frame $200

    Ill take it, shoot me a price for shipping to belvidere, IL 61008 and a paypal address. Thanks
  21. G

    HESC V1 150v 600Amp VESC based motor controller

    Ohhh i just realized you have a cl350, mine is a c350. Taller caps. glue removed from left side, still holding right side caps to the board.
  22. G

    HESC V1 150v 600Amp VESC based motor controller

    Yea mine wasnt either, i meant the glue holding the caps to the board. I slipped some fishing line under the caps and worked it back and forth like a saw, then used boat loads of solder wick to pull the cap boards off. Dont think i could fit anything under them they were solid contact with the...
  23. G

    HESC V1 150v 600Amp VESC based motor controller

    I noticed that on mine too, probably wont be an issue, but my ocd got the best of me. Unsoldered the cap boards so i could detatch the epoxy holding them to the logic board and moved them up a tiny bit, also resoldered them/pushed them in just enough so they arent touching the logic board...
  24. G

    Your Creation's Before & After Pics

    No before pics, it was just some spare parts i had laying around. Old khs frame, 20s6p vtc4 battery, shunt modded chinese ,controller pushing ~130A, Laced up a 16" dirt bike rim onto a 45h NBE motor, frocker rips.
  25. G

    E-bike kit problem: SW900 and error 9

Back
Top