Electric Longboard Setup Help

[bbcane78]

Hi, I am building an electric longboard and I am wondering if all of these parts will work well in this setup.

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=35029
An enertion VESC
2X http://www.hobbyking.com/hobbyking/store/__8579__ZIPPY_Flightmax_5000mAh_3S1P_20C.html
http://www.hobbyking.com/hobbyking/store/__76462__IMAX_B6_AC_DC_Charger_5A_50W_With_US_Plug_Copy_.html

I am making a custom mount and am using Caliber trucks and 83mm Flywheels. I plan to program an arduino chip so I can control the board with a wii remote. I have the belt and belt pulley already. If I am forgetting another key component please let me know. This is my first build and I want to do it right so any recommendations are greatly appreciated and if anyone has any tips on the building process I would love to hear them. It would be a shame to spend tons of money just to screw up and break everything. All help is appreciated!

 

[amberwolf]

Is there a reason you aren't using your original thread?
https://endless-sphere.com/forums/viewtopic.php?f=35&t=74074

Starting multiple threads on teh same project is just going to make it harder for people to help you, and less willing to do so.

 

[torqueboards]

iMax B6 is ok but you'll end up watching your charger for hours. If your time is worth money, I'd suggest iCharger 208B + HobbyKing and a 4mm HXT Parallel Charging board which you can charge multiple batteries in 30-45 minutes.

Motor should be fine.