jonpad01
1 mW
This will be my 4th bike frame. List of major components:
-Fucare Taurus frame and front fork (26" fat bike) (have this)
-3shul C350 V4 controller (have this)
-QS 205 4T Motor with the 175mm axle (waiting on this)
-Home made battery - 72v 30ah (20s7p) using molicel p42a cells (waiting on parts)
Some special pieces that I want on the system:
-Need a 120mm torque sensor, possibly one from Bafang? (There are some 120mm "T9" torque sensors on aliexpress)
-Get rid of the cycle analyst and instead use my own microcontroller for torque sensing (I wish the CA code was open source)
-Integrate grins analogue style brake lever into the 3shul controller for variable regen braking
-Add a 5 or 7 speed freewheel to the QS 205 using round nuts if needed
-Add the largest possible chainring on the front, I want to pedal at 30mph!
The frame as it came from Fucare
Here is the headset, had to buy cups for it
Cups installed
Top head tube takes a ZS44/28.6, bottom takes a ZS55/40, I'm using an adapter for a non tapered fork.
-Fucare Taurus frame and front fork (26" fat bike) (have this)
-3shul C350 V4 controller (have this)
-QS 205 4T Motor with the 175mm axle (waiting on this)
-Home made battery - 72v 30ah (20s7p) using molicel p42a cells (waiting on parts)
Some special pieces that I want on the system:
-Need a 120mm torque sensor, possibly one from Bafang? (There are some 120mm "T9" torque sensors on aliexpress)
-Get rid of the cycle analyst and instead use my own microcontroller for torque sensing (I wish the CA code was open source)
-Integrate grins analogue style brake lever into the 3shul controller for variable regen braking
-Add a 5 or 7 speed freewheel to the QS 205 using round nuts if needed
-Add the largest possible chainring on the front, I want to pedal at 30mph!
The frame as it came from Fucare
Here is the headset, had to buy cups for it
Cups installed
Top head tube takes a ZS44/28.6, bottom takes a ZS55/40, I'm using an adapter for a non tapered fork.
Last edited: