Search found 208 matches

by TorEddy
Mar 01 2021 1:58pm
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

Would this also apply if you have a primary reduction from motor to a jackshaft in the swingarm pivot, and a secondary reduction from the jackshaft to the rear wheel? This solution could achieve the same total reduction using larger cogs on both stages. using a primary timing belt and a secondary ch...
by TorEddy
Dec 12 2020 3:28am
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

Much exciting work going on in here now:-)

Just ordered a 15t pulley from CD, and I am excited to see that a 20s5p pack (72v, 17,5ah) would fit in the frame..
(looks like 100cells with BMS would need to be in two parts)

Good work guys!!!
by TorEddy
Dec 06 2020 12:05pm
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

I have several rides in sub zero degrees and and have never experienced any slippage from the freewheel.
by TorEddy
Nov 20 2020 1:54pm
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

The Neematic principal in a lighter frame with a smaller motor and battery, would make a great starting point for LMX's next model. I agree, but they would have to find a place for a torque sensor... Difficult with an off the shelf Pinion, but possible with an integrated design. I always wondered i...
by TorEddy
Nov 20 2020 9:29am
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

The Neematic principal in a lighter frame with a smaller motor and battery, would make a great starting point for LMX's next model.
by TorEddy
Nov 18 2020 4:31am
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

LMX, says: The torque sensing is much more precise and tunable with those new controllers, and the 5 modes allows more flexibility in the different modes tuning. That will be a great update to your bike and you will really feel the difference if you like riding with the PAS/torque more than the thr...
by TorEddy
Nov 17 2020 2:58pm
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

Yes, LMX changed the standard controller from Nucular to Silixcon SC controller, and the display along with it. https://silixcon.com/sc-controller-series/ I will do the controller and belt upgrade this winter. The Silixcon controller looks way more professional than the Nucular, and regarding the Ch...
by TorEddy
Nov 14 2020 9:33am
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

I might also be interested in a 15t belt sprocket even though i have not yet ordered the belt drive. Will the standard 14t belt sprocket be comparable to the 12t chain sprocket i currently use? If so, will the new 15t belt sprocket be comparable to the 14t chain sprocket my 64 came deleverd with? I ...
by TorEddy
Oct 31 2020 3:51am
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

Nice video Adam! I like these build videos and love too see all the details going into each build! I would add some cool background music to the video, just to make it even more interesting. This winter i will upgrade my 64 with new controller, belt drive and the zeb forks. I already have the rear s...
by TorEddy
Oct 22 2020 1:48am
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

Nice engineering Scrambler.. This will be a costly rear wheel for sure, but it would be nice to get rid of the casette and derailleur if possible. A lower amount of gears with the same 30ish gear range , is awesome for an ebike. And the ability to shift while stand still.. :mrgreen: One would still ...
by TorEddy
Oct 15 2020 5:02pm
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

@Scrambler I was a prototype test pilot for the Kindernay IGH when i had my previous BBSHD bike. I know the two startup guys of Kindernay here in Oslo, Norway, and i have gone through several iterations of the IGH. It was pretty solid in the end, but i cannot see how you can integrate the LMX freewh...
by TorEddy
Oct 13 2020 2:41pm
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

Nice work scrambler!!
These calculations should also work for a 72v battery which would be more interesting for me.
A 20s5p would be a nice battery for those who want power more then capacity (72v, 100 cells and 1260wh).
by TorEddy
Oct 12 2020 12:39am
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

Also on mode 3 I set my Battery to 55A and Phase to 180A and for some reason on full throttle uphill after like 3seconds the battery output drops to 40A and if I untwist and twist the throttle again I get my 55A back and it all happens again.... can't I get 55A continuous power? Is it limited by th...
by TorEddy
Oct 11 2020 11:47am
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

Thanks , So 57.5mm on the motor side and 70mm on the pedaling side. Did you measure the center of the chain? On the pedaling side 70mm sounds like a lot, did you have the chain on the middle gear? Thanks again Yes that's correct. I measured center chain in front with the chainring with the chain in...
by TorEddy
Oct 11 2020 10:24am
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

What do you mean? Are you looking for chain length or sideways chainline (if so, how do i describe that)? What I mean by chainline, is the distance between the centerline of the bike (middle of the bike in the longitudinal axis) and the center of the sprocket. https://bike.bikegremlin.com/1755/bicy...
by TorEddy
Oct 11 2020 10:10am
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

Bike park riding with the 64 and testing a suntour Tri-air shock. The shock performed well and the 3 position platform switch makes it very easy to tune. We are thinking about offering those but production delays due to covid at suntour and some others are crazy for 2021 :cry: Nice video Adam. That...
by TorEddy
Oct 11 2020 8:19am
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

Nice video @jimmywazer

Good to see somebody taking the time to film from a third party view.
It's much more entertaining when you get a mix of both views, not only the 1.st person chest mount view.
by TorEddy
Oct 11 2020 7:59am
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

What kind of tyres are you guys using? Just got a flat on my front tyre from busting the valve into something. Looking at Eddy Current 2,6 27x5. Any tips? Riding mostly wet dirt rocks and roots. I ride Maxxis DHR and DHF II 27.5 2.8" tires. They have 3C aka triple compound rubber that makes th...
by TorEddy
Oct 11 2020 3:08am
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

I got the battery 'issue' sorted. I drained the battery empty with the bike running on a stand. It ran till it shut down by itself. Voltage was then approx 42v and the fuel gauge showed -334Wh. https://lh3.googleusercontent.com/pw/ACtC-3crdmpi5yriTbJv1ArlVb-HNUBL0304pLfXRGN0PZJnY5ZelJxE7I7oAk73A-L8x...
by TorEddy
Oct 10 2020 5:12am
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

When charging the battery after my previous ride, it suddenly tops out at 56,9v compared to 58,8v when it was new. The fuel gauge does not show a full tank either. I'we tried disconnecting and connecting the charger several times, but it will not charge anymore. https://lh3.googleusercontent.com/pw/...
by TorEddy
Oct 10 2020 2:25am
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

Anyone knows the Motor chainline and the pedaling chainline on the LMX 64? Thanks What do you mean? Are you looking for chain length or sideways chainline (if so, how do i describe that)? I had a ride with a friend on a legal 250w bike the other day [youtube]HU47xTnx14E[/youtube] This is when i not...
by TorEddy
Sep 27 2020 4:50pm
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

passuff wrote:
Sep 27 2020 4:09pm
Cyc x1 with 12F or bac2000?
He just switched from bac to nucular.
Main problem is the drivetrain not coping the 6000w. Chain and freehub breaks down..
by TorEddy
Sep 27 2020 12:23pm
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

Good testing conditions for the belt :!:
I really like the color combo on that 64... Makes me want to upgrade my stickers :shock:

Heres a new video from my local playground riding with a CYC X1 (6000w but breaks down every time :lol: )...
[youtube]7hRbbtPX4Kc[/youtube]
by TorEddy
Sep 08 2020 2:56pm
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

Got my first ride with the 40mm motor and I must say the difference is huge! No more overheating even on the most technical climbs going full moto... I had to set the field weakening from 30A to 60A to get the same top speed as before (58km/h). And I have a weird "squeaking" noise when I ...
by TorEddy
Sep 02 2020 4:02pm
Forum: EBike General Discussion
Topic: E-S LMX 64 Bike Owners
Replies: 1094
Views: 99601

Re: E-S LMX 64 Bike Owners

I had a ride on the LMX64 today, and now i noticed that me as well have a strange sound coming from the crank/motor area. I can feel the vibration from the noise in the pedals, and its not there when motor is not engaged. I would not call it a ticking sound, but more of an unpleasant crunching sound...