Endless Sphere

Does gearsensor (deraileur version) and hydraulic brake sensors works with phaserunner?

Do you plan to embedded phaserunner inside the BBSHD?

LMX 161 with working pedals planed?

bzhwindtalker wrote:LMX81

Nevermind... looks like it was my connection.

Hi Allex, nice to hear about a beefedup Max-e.
Does adaptto plan to release a controller with more fets? like 24 or 36?

I've been looking for a good lacing solution for my own motor of similar size... I would try 12ga Titanium spokes, long brass nipples with rim washers. Ti flexes much better than steel. Most road cyclists abandoned them because when they are long, Ti spokes don't make a wheel stiff enough for their...

72 spokes should have a meaningfully improved shot at survival. Meaningfully survival improvement coming from you means alot. :mrgreen: :mrgreen: :mrgreen: as mentioned, if you give tension to those 72 large spokes, the RING shaped spoke flange could rip to pieces!! Will be using 11g spokes instead...

liveforphysics wrote:72 spokes should have a meaningfully improved shot at survival.

Meaningfully survival improvement coming from you means alot.

@gensem I believe you would have better success with a custom drilled rim. 9 groups of 4 with proper angle for single cross, making a 36 spoke job better than 72 radial, yet lighter. Another fancy solution is to drill 72, use 9 groups of 4 for single cross and 9 groups of 4 radial. You could use th...

Not even the 18'' rim huh Tough luck there , if your custom rim idea doesn't work , :idea: im thinking a custom strip [ pos 3mm alloy if you have the clearance inside a standard rim ], then drill your required/ custom spoke angle through the existing holes through your new strip and counter sink fr...

Short of using a solid wheel, it looks like there's no other option but to use radial lacing for the 273 inside almost any rim. The angles are just too extreme. Seems to be working for some. Good luck! I wonder if a 19" wheel would work for 1 cross? I need to check the dimensions and see what ...

Not even the 18'' rim huh Tough luck there , if your custom rim idea doesn't work , :idea: im thinking a custom strip [ pos 3mm alloy if you have the clearance inside a standard rim ], then drill your required/ custom spoke angle through the existing holes through your new strip and counter sink fr...

Q76R with left side sprocket, thats something I wanna see.

Bad quality photo of the bike getting together. Vector.jpg Looks like your going to be first out the blocks with some interesting performance stats with that 40mm x 273 motor :)... deserves its own thread i think.. watching.... Not quite... I had a 17" and 18" rim failing on me because th...

So I've read and read....more confused now then ever. On a Max E and 3.5T QS 205 running 20s and planning on running lots of power through it which breaker should I use? A single 63, two 63 in parrallel, two different brands of 63's in series or different size by it self? So confused when I should ...

BCTECH wrote:

gensem wrote:80mm but shorter would be better for a 17" rim.
Shoulda fit a 18" rim nicely.

sorry, I mean the gauge size. are you using 8 gauge?

Yep, 8g.

80mm but shorter would be better for a 17" rim.
Shoulda fit a 18" rim nicely.

Bad quality photo of the bike getting together. Vector.jpg Small update... 4 Spoke nipples with washers went thru the rim when I doing one my first riding tests (50-60kmh) due to extreme lacing angle. I ll try to lace a 18" rim next week to see if the angle gets any better (was using a 17"...

Bad quality photo of the bike getting together. Vector.jpg I just looked at that photo again. That is some crazy 3 cross in a tiny space! What kind of rim is that? Did you have to drill the angles in the rim? Its single cross... I ll take a better picture today. Yep had to drill the holes to get a ...

Hi Gensem. We need video. This motor looks insane in 17rim:) Video ll take awhile... Im still having a hard time with Adaptto. I do get over 150kmh no load in the bench, but when I try to ride it gets the controller in protected mode like a maniac. Will reset the controller again and fiddle with ph...

Gensem, That looks sweet!!!!!!!!!!!!!!! Could you post a pic of the rim and motor? I would like to see how you laced her up. What kind of rim / spokes did you use? Thanks. I ll do soon... wheel is not true, need to mess with it later. Spokes are stainless steel 80.5mm, rim is a 17" 1.85 Brakes...

Bad quality photo of the bike getting together.

I finally got my QS273 4kw 16.8kv running. Im using a MAX-e but its cutting power like crazy. Anything over 200a phase or PWR timing over +0.51 gets in protected mode even at low speed partial throttle. If I keep mild settings im able to get to 60kmh before the power cuts but the aceleration is meh...

I finally got my QS273 4kw 16.8kv running. Im using a MAX-e but its cutting power like crazy. Anything over 200a phase or PWR timing over +0.51 gets in protected mode even at low speed partial throttle. If I keep mild settings im able to get to 60kmh before the power cuts but the aceleration is meh....

Not alot to show yet, but its here!

amberwolf wrote:https://endless-sphere.com/forums/viewt ... t=stickers
https://endless-sphere.com/forums/viewt ... t=stickers
etc

I do have Hyenas bick cock motor sticker and intend to use it, just need to find where I left it. -.-