Endless Sphere

Thanks for all the help the battery is fine it work well with the new controller

The sabvoton controller is faulty and is being returned for a full refund

Yes I did that the motor don't move and this is what I have done

https://youtu.be/QmiaaCPQihI

the low cut off for my battery is 62.5 volt it is a lifepo4 I can't even get the controller to recognise that

does this look ok to you ?

Yes I get what your saying but if someone is selling a 72 volt controller I think It should read the voltage of the battery correctly 50 volt low cut off will kill the cells :cry: otherwise its a guessing game I just need to show them what should happen rather than what is happening can anyone help ?

Hi all I have a new sabvoton 72200 controller but all is not well :? I have a 72volt lifepo4 battery also new so the volts on it are 80.6v but the controller reads it as 56v I asked the seller of the controller for advice and they told me this is normal and should just put me low voltage down to 50v...

I Would ask a shop like TF Tuned ,I think fox owns marzocchi know, marzocchi on face book or marzocchi mark on pink bike he has a shop full of parts but the last time I was told 1L but this site http://marzocchiworkshop.blogspot.com/p/oil-quantitys-and-levels_858.html say 135cc both legs but it depe...

the controller is now sold

Hi all I am thinking of selling my controller 1/2 price as i bought the wrong one it's https://em3ev.com/shop/12-fet-irfb4110-infineon-sensored-controller/ will only sell in uk £60 + postage ps it comes with 4mm gold bullet connectors (male off and female attached ) if you would like me to reprogram...

Hi all just thought I would share me and my brother both own 48 volt self make e bike we both over heated them at the same time and we both use 20ah battery's and the same controller ( https://em3ev.com/shop/12-fet-irfb4110-em3ev-controller-black/ we decided to re wire them both with 16awg and 30awg...

here is a update made I rear floating mud guard used 4mm alloy and the front of a top peak xc1 to make it also vinyl wrapped the arm in carbon fiber 20180602_164359.jpeg can't seem to sort out the one near the spring tried with plastic too make it stronger but no luck :( sorry also added a 800ib ti ...

Ok this is a walk-through on how to add pictures to ES step one take a picture step two put it on your pc step three go to google and type in resizer image like this and click picresizer Untitled.jpg step four upload your picture in the Browser upload it.png step five once you see your picture scrol...

New helmet ordered

Thanks soaresdacosta.
I can't wait to finish it should come togather fast know new 800lb titanium spring on the way and the wiring up should be easy hope my lights look the way I think they will

Hi all it's been a long time coming but here is a pic of my bike it's 4 feet tall and 2.10 meters long it's still not finished

Hi all thanks for the response just too update you I went for is

https://kosonorthamerica.com/shop/motorcycle-mx/dl-02s

but on ebay cheaper

update on the build part's came back for paint but wrong colour and I was going to finish most of the build this week

Update I have just ordered a speedometer but will not be able to show pictures until I finish the build

But it should look like this :

+1 awesome


PS front tyre needs turning around V's facing front

Hi I can't seem to up load the video here so here is a link to the chase wire https://www.pinkbike.com/u/the12be/channel/lights/ as you can see I can speed it up and slow it down and can also make it go both ways I will be using transparent heat shrinking to add the chase wire in with the power and ...

Awesome build looking very good you will soon be enjoying it happy days

I'll take some pictures of the chase wire when the battery's turn up
ps the chase wire will be a video

and here is the braided wires

Hi all quick update rewired the motor and used white heat shrink with black braided over the top :D Also purchased lights EL panels for sides light slots and chase wire from frame to motor. will post pictures at end of build sorry needs must and all :idea: this is the chase wire http://elwirecraft.c...

https://nsmb.com/articles/gary-fisher-e-mtbs

Uphillflow from the original mtb man

please show me a picture is it like this
even this uses torque arms

hope this helps

viewtopic.php?f=6&t=38754&start=225