Endless Sphere

Dear Friends,

Have any of you saved the original configuration of your Cycle Analyst from a Grin RTR GMAC set and could email it to me? I have unfortunately lost it

br
Marc

Btw:

if someone wants to have the AKM configuration file for the Baserunner / Phaserunner, please contact me via PM

Hmm, is your Kit from Grin a RTR Kit? Was the CA3 preconfigured ? (if yes, did you make a backup of the preconfig RTR Config on your CA3 and can you upload the original CA3 Config?) Btw. with beta Firmware 3.15b1 was some changed was affected in 3.15b3 too. read the Release notes in your CA3 Softwar...

I Loose sometimes on my phaserunner V2 the 5V from throttle (and hall sensors?) if I have connected a 3.5mm Data Cable with 4 pin TRRS Jack. If I change ist to the normal 3pin TRS Jack, the problem is solved. Maybe a try for you, if you have connected the USB Programming cable?

sure, see: https://www.ebay.de/itm/363410345684 the rim is nothing special, but otherwise, if you are looking for a plug & play system for the price quite ok. Compared to my previously installed G060.750, the G062.1000 has the advantage with the cable outlet on the other side and it also seems t...

Does anyone of you use the G062.1000.DC (6.5) with a Grin Phaserunner controller? I had so far the G060.750.DC (06) on my Surly Wednesday with the Phaserunner running and the ran relatively quietly and inconspicuously. Grin already offers a suitable preset for the Phaserunner controller with G060 in...

gmm, i´m really interested in G062.1000.DC too. Actually I used a g060.750.DC (6) 20" 175mm Version on my Surly Wednesday and this is for my purposes to fast and not strong enough for my hills on country side. I´l never seen a G062.1000.DC with slower windings, so I think about to buy a g060.75...

Thank you for your question. I use a grin phaserunner Controller with fully opened phase current and limited Battery current to 25A (with 13s Battery). For normal Street cruising this is much more than I need, but for climb up small offroad tracks in mountains with 1000m it is a problem. For this re...

hmm, where you have ordered you g062? Actually I used a g060.750.dc with fast winding for 20" tires. (but it is not strong enough in my 26" fatbike wheel with 48V batteries) where i can see the ordering difference between g062.1000.DC standard wind / fast wind? When I have a look to Bafang...

Dear Friends, which current bluetooth module do you recommend at the moment? I don't really need it for the CA3 but for the Phaserunner to read the temperature. Since the USB to TTL cable for the CA3 and Phaserunner is identical, a CA3 Bluetooth module should also work for the Phaserunner. Grin rele...

Dear friends, thank you for your tips. :-) I try many times settings with my CA3s and my Baserunner or Phaserunner devices, so I want for easier access build a stable BLE 4.1 Bluetooth connection via PC or Grins Phaserunner Suite Android App. Did you maybe have a recommendation, to make this possibl...

Dear friends, now the small Aikema works well. Thanks a lot of all our recommendations. Im not really shure, if Feedback Bandwith Tuning match perfect for this really small HUB Motor, but I had only one times an little bit rattle noise on my Fork as I push fully my throttle at maybe 20 km/h. A membe...

Thank you for your answer. So, I have tried some other parameters. First I test step by step with thumb throttle and sound listening when reach my geared front motor the max RPM. Between 170 and 180 polepairs I hear no difference, this is the max of RPM with free wheel testing (Actually I don't have...

Did you found a solution vor Baserunner with Z9? (https://ebikes.ca/baserunner-z9-stand-alone.html) Actually i owned a Baserunner Z9 and iam not shure how I can get speed Signal to my CA3 with wp8 connector, my geared Hub Motor provide on his Z9 motorcable only temp sensor... In the phaserunner v3 d...

I only have a 75sx, but maybe the feedback bandwith tuning section is relevant. I did play with it for a while to get it to work as I wanted. Thank you, so I will have a try tommorow :-) Did you use the autotune function for your setup and how to U determine the correct poles for your sx75? Btw: th...

Dear friends, I've been trying for days to get my Phaserunner / Baserunner to run with an Geared Front HUB Aikema AKM-100SX, but it didnt run smooth. Now I'am think, there are some parameters wrong, the autotune function doesnt help. Now I have no glue anymore :-( Here are some technicals specs of m...

Dear friends, has anyone already had experience with the conversion of a standard Phaserunner wiring to L1019 Connector and maybe a schematic wiring diagram? (Phaserunner vs Phaserunner_L10) Today I get my new GMAC 10T Motor with the L1019 Connector for my Surly Ogre Travelbike and now I´am thinking...

Hi@all, I bought at ebay a second HP8204L3 Charger for using at my office. I opened the original Charger from my BH NEO Cross bike and the other one from Ebay. Both have different potentiometer. Maybe the Chargers have different Revisions, the BH NEO Cross charger is newer. See.. HP8204L Diamant Zou...

Hi Cole, No, I have only a European Neo Cross with PAS. (Max 25km/h) But if it possible to Test Something without Special Equipment I will try Something :-) BTW: my drive Unit is Labeled with a 28" Button. But: If I Checked the Speed with a additional GPS, the BH Display Shows 5 Kilometers fast...

Hi @ All :-) Where I can order some parts for my Neo Cross like the pricelist above? (which dealer deliver some parts to germany?) (I need Battery, Charger and Controller plastic cover) Full Details: Dealers Book with Repair Instructions spain: http://www.mapzone.spb.ru/catalogs/ebikes_bh_2013.pdf e...