Endless Sphere

Yeah I did not even think about that trick. I wonder if a normal bolt can fit, make my own tool to make it snug, threaded bar, washers and some nuts. And I need to scrounge the dump bins for a long pipe for some added leverage. Everyone I've seen so far coming from China. 333.resized.jpeg i use impa...

I pulled the wires with clamping pliers. I used teflon ptfe wire from a guitar parts seller in cali, very slippery insulation and stiff wire with larger strands in the wire. It was a work out to slide the wires through. The hardest part is getting past the 45 degree angle, so sometimes it best to no...

Do you have a digital multi-meter? If so put it on diode buzz sound and figure it out. I Have a lyen 12 fet with a 3-speed big white connector the wire colors are red black green. My three speed QS throttle with off/ on button has three wires for three speed switch has three wires green yellow brown...

Its cartridge, ccw is non drive side to remove, cw is drive side to remove.
Even this guy couldnt get the tool flush, but his is not rusted tight.
https://youtu.be/yBnYoYVTnlo?t=158

Italian is both right hand thread.

5 minute epoxy weld glue might be a last ditch effort.

Try an impact driver with an adapter that fits your spline tool? Theres the other splined bb tool with shorter splines. I have a cheap 10" breaker bar style from Princess Auto (Canada's Harbor Freight) I dont have any impact except a 1/4" Ryobi impact driver, and 2 normal battery drills. ...

I have a Cyclone mounting plate is on drivers side that I cant get off English thread on Northrock XC00 fat bike from Costco made by Giant. Cartridge fat bb Splined tool Wide bb for fat bike Pictures will show the splines are fully engaged. Tried lots and lots of oil, but maybe I need another penetr...

You need to know what connectors can fit the gauge of wire you are using. XT90's will only be able to handle up to a certain gauge, but there are 5.5mm bullet connectors and 6mm and 6.5mm bullet connectors, but there is also Powerpole SB connectors that probably wont suit your needs as they are huge...

Did you pay by paypal?

So when Defiant LC is on his 500 miles ride and the belt breaks, good luck finding one at the local bicycle shop.

Why wouldn't Rich convert the Sherpa to electric?

KLS-H - Sealed (IP66) Sinusoidal Wave Brushless DC Motor Controller https://www.kellycontroller.com/shop/kls-h/ 3 hall position sensor inputs. Open collector, pull up provided. Controller can do auto_Identification angle for different degrees of hall sensors. Provision of a +5 volt and +12 volt outp...

What model KLS?

https://kellycontroller.com/controllers ... brushless/
KLS-8080I works with BLDC motors with hall sensors. KLS-8080IPS can work with BLDC motors with sine/cosine speed sensors.

I don't know, should be temp wires there but maybe they are just not labelled or maybe some sabvoton models dont have it. All the ones I looked at had the temp wires. Are all your wires on the controller accounted for You know what every wire and connector does Are all the wires labelled? Yes, you a...

Matt Gruber wrote: ↑

Apr 13 2021 11:17am

near the end Dr Greger says how chewing B12 is way way better https://www.youtube.com/watch?v=_KCLElQ ... nFacts.org

Chewing pills or chewing chewable form vitamins?

Suuuuure, but what does Google have to say about it.

DrkAngel wrote: ↑

Apr 13 2021 4:12pm

Period should go outside but exclamation mark should go inside?

https://www.thingiverse.com/thing:2191603

Summary

Building a homemade electric bike using 3D printed parts! It was definitely a learning curve

Damn, there's that word again "definitely". I just wonder if the period goes inside the quotes or outside.

Maybe Chalo meant to grease the brushes on the brushed motor for extra torque off the line, old tech and all.

Don't bother, guy hasnt even logged in for 2 years. Best to put efforts towards next new guy. I am starting to use the Quick Links on the top left, Unanswered topics wouldnt have sufficed. Some posts just fall through the cracks.

42 pounds of battery
You'll need a few extra wraps of black Gorilla Tape to hold that onto your bicycle frame.

Kool-Stop Salmon rim brake pads are the way to go!
Regen helps save pads to.

Interesting
Two unite motors on the front
Thats a lot of angular stress on your mount, hate to see you hit a bump on that bike.

latecurtis wrote: ↑

Apr 12 2021 10:59pm

Lets find that.
download (5).png

Now that I will have all the batteries I will ever need I am a mad man.

Advance auto parts rep told me this Saturday they would take my 48v lithium battery pack for recycling. Home Depot is another possibility, but their website say 11 lbs and 300 w maximum. Whom you really need to be best buds with is any of the tool reps for tool batteries :wink: :thumb: Maybe get th...

Looks like plastic encasement, so hopefully its pretty thick plastic.

Greenway FULLY TESTED 48v 15.6ah 748.8wh w/ BMS - Regular price $120.00

9.5" x 5.5" x 3"

I rode with a flat 19"x3 knobby motorcycle tire and really did not notice a big difference. The tire is a normal dirtbike knobby tire, very stiff, very heavy. I will look into 22" bmx rim with 18" moped tire, but I wouldnt want to go much smaller then 24" bicycle wheel size. Goin...

I literally just read up on this. The Odyssey battery is a great alternative to the Optima batteries. I did read that Sears has a similar product, but since Sears is gone in Canada I did not read the 2009 post in Pirate4x4 forum. I noted the Optima batteries are $240cdn (www.4wheelparts.ca, Costco r...