Search found 66 matches

by burner77
Jul 11 2019 1:55am
Forum: EBike Reviews & Testing
Topic: Grin Phase Runner / CA3 and BBSHD
Replies: 195
Views: 55188

Re: Grin Phase Runner / CA3 and BBSHD

Connect the programing cable and check what the software says
try to run it sensorless
by burner77
Jun 04 2019 10:17am
Forum: EBike Technical
Topic: XPD: open-source keywin e-bike lab replacement
Replies: 611
Views: 184422

Re: XPD: open-source keywin e-bike lab replacement

Does anbody know which profile has to be used with the 24 fet 4115 EB624? I can find it just for 18fet max. Thanks
by burner77
Mar 22 2019 12:10pm
Forum: EBike Non-hub Motor Drives
Topic: GNG / CYC X1 Pro 3000w
Replies: 748
Views: 105910

Re: GNG X1-pro 3000w

better to have somebody with a lathe. The axle and the thread have about 0,2 mm difference, which gets bigger and bigger with every acceleration. A thread is never that strong than a even metal. There are plenty of adapter for the BBSHD, you can use them. But the motor will be pressed to the adapter...
by burner77
Mar 12 2019 2:09am
Forum: EBike Non-hub Motor Drives
Topic: GNG / CYC X1 Pro 3000w
Replies: 748
Views: 105910

Re: GNG X1-pro 3000w

If you really THINK you know it, go drag race a BBSHD at 50A with your skinny wife on it (until the Nylon gear goes) against a strangled CYC running at 50 A when the whole point is it can handle mush more (like 90A peak BAC 800) If you want to fit he CYC to a heavy EEB frame or Vector or similar - ...
by burner77
Mar 10 2019 1:25am
Forum: EBike Non-hub Motor Drives
Topic: GNG / CYC X1 Pro 3000w
Replies: 748
Views: 105910

Re: GNG X1-pro 3000w

it is the 13S controller, which also runs with 14S
I don't have the 20S controller yet
by burner77
Mar 09 2019 1:17pm
Forum: EBike Non-hub Motor Drives
Topic: GNG / CYC X1 Pro 3000w
Replies: 748
Views: 105910

Re: GNG X1-pro 3000w

finally I found some time for filming and editing:
https://youtu.be/YkjWWj9loX4

After a few improvemts in firmware and few testrides we compared it to the BBSHD with shut mod. Pretty impressive for his size and definetely more torque!
by burner77
Aug 13 2018 3:19pm
Forum: EBike Reviews & Testing
Topic: Grin Phase Runner / CA3 and BBSHD
Replies: 195
Views: 55188

Re: Grin Phase Runner / CA3 and BBSHD

Grin is now offering a ready to go harness for the BBSHD
a have ordered a few and took a few pics how it works
for all interested in:
moderator removed this link- it did not contain what it claimed
by burner77
Aug 05 2018 1:16pm
Forum: EBike Reviews & Testing
Topic: Grin Phase Runner / CA3 and BBSHD
Replies: 195
Views: 55188

Re: Grin Phase Runner / CA3 and BBSHD

BBS02 is already on the limit with 25A
the robust controller is useless, if your motor is too weak
go for a BBSHD
by burner77
Jun 02 2018 4:46am
Forum: EBike Reviews & Testing
Topic: Grin Phase Runner / CA3 and BBSHD
Replies: 195
Views: 55188

Re: Grin Phase Runner / CA3 and BBSHD

I had melted Anderson 45 phase connectors with the original 30A
I would suggest some other connectors, like 4 mm gold or also the MT60 for phase
by burner77
Mar 23 2018 1:59pm
Forum: EBike Reviews & Testing
Topic: Grin Phase Runner / CA3 and BBSHD
Replies: 195
Views: 55188

Re: Grin Phase Runner / CA3 and BBSHD

I am about to pull the trigger on purchasing a CA and phaserunner and I will figure it out as I go. I assume I need the CA3-DPS rather than the CA3-DP? or can I use the speedo from the BBSHD unit somehow Go for the CA3-DPS. The speed signal goes into the controller and you remove the original contr...
by burner77
Mar 22 2018 9:13am
Forum: EBike General Discussion
Topic: How To, 50A BBSHD Controller Mod
Replies: 279
Views: 62761

Re: How To, 50A BBSHD Controller Mod

you had to remove the Ludi pics?
by burner77
Mar 15 2018 2:06am
Forum: EBike Reviews & Testing
Topic: Grin Phase Runner / CA3 and BBSHD
Replies: 195
Views: 55188

Re: Grin Phase Runner / CA3 and BBSHD

Thanks, can you post you complete configuration file of the Phaserunner, please
by burner77
Mar 01 2018 10:01am
Forum: EBike General Discussion
Topic: How To, 50A BBSHD Controller Mod
Replies: 279
Views: 62761

Re: How To, 50A BBSHD Controller Mod

Thank you for all the helpful info. About my previous display question: DPC14 is made by APT display, what about DPC18 made by Bafang? Is this really a problem of the display or the controller itself? The question is, if the display DPC14 shows a lower voltage using a voltage dropper resistor, than ...
by burner77
Feb 27 2018 12:11pm
Forum: EBike General Discussion
Topic: How To, 50A BBSHD Controller Mod
Replies: 279
Views: 62761

Re: How To, 50A BBSHD Controller Mod

Just to make a summary after reading everything twice. For a 50A mod replace the 2x 5 mOhms on the rear side of the PCB with 2x 3 mOhms (Width: 3.18 mm Length: 6.35 mm, Height: 0.35 mm). Power can be lowered in programming software, for example 24A = 40A Mouser WSLF25123L000FEA original display goes...
by burner77
Feb 22 2018 11:37am
Forum: EBike Reviews & Testing
Topic: Grin Phase Runner / CA3 and BBSHD
Replies: 195
Views: 55188

Re: Grin Phase Runner / CA3 and BBSHD

would be nice Reinhard! And great work as always… what we also need is a proper setup than. If you could post your experience with settings would be great! I have got some basic info from Justin directly: there are two ways of tuning the PR to a mid drive like the BBSHD system. Either you look at th...
by burner77
Feb 20 2018 2:24am
Forum: General Discussion
Topic: The Crown vs 24 inch Rim grrrr
Replies: 32
Views: 4891

Re: The Crown vs 24 inch Rim grrrr

get a MXUS 3K 3T, which is better and cheaper
always a problem lacing a TC
by burner77
Feb 19 2018 3:17pm
Forum: EBike Reviews & Testing
Topic: Grin Phase Runner / CA3 and BBSHD
Replies: 195
Views: 55188

Re: Grin Phase Runner / CA3 and BBSHD

would be nice to get a full setting list, since we can organize the parts by our self. Seems that ERT let wait his customers for months. And I know I'm not the only one to be interested… Thanks
by burner77
Feb 18 2018 2:34pm
Forum: EBike Non-hub Motor Drives
Topic: Ultimate BBSHD Grin Phase Runner FOC 3000W
Replies: 179
Views: 38452

Re: Ultimate BBSHD Grin Phase Runner FOC 3000W

How about posting all the used settings of Phaserunner and CA? Since I already have Phaserunner, CA and BBSHD… would be great. I think I'm not the only one. Thanks
by burner77
Nov 26 2017 11:02am
Forum: EBike Technical
Topic: Adaptto Mini-E/Max-E Owner's Thread
Replies: 5185
Views: 647038

Re: Adaptto Mini-E/Max-E Owner's Thread

Is there a left hand thumb throttle that's waterproof? I would like to use it for the regen, (Adaptto had variable regen?) or should I use a button instead with the "smooth mode" I read somewhere that using a thumb throttle for regen solved the problem of needing a resistor for the Domino...
by burner77
Nov 23 2017 6:34am
Forum: EBike Reviews & Testing
Topic: My Bafang Ultra Mountain Bike! Frey AM1000
Replies: 2405
Views: 338500

Re: My Bafang Ultra Mountain Bike! Frey AM1000

Yes the one on the pic is different, I haven't see any price for that, but I have got a email if I'm interested. The one I have tested wasn't constant in power in the flat, it didn't pause, it is because of the torque sensor or some other issue. The full power was available, but only when pedaled ha...
by burner77
Nov 23 2017 4:04am
Forum: EBike Reviews & Testing
Topic: My Bafang Ultra Mountain Bike! Frey AM1000
Replies: 2405
Views: 338500

Re: My Bafang Ultra Mountain Bike! Frey AM1000

The concept looks interesting and there a different ones around from China, all pretty similar. I have got a email today with a cheaper version of it. See attached pic. I had the chance to test the bike you have ordered. From the motor feeling is pretty different than a BBSHD. While with the HD at a...
by burner77
Nov 22 2017 9:41am
Forum: EBike Technical
Topic: Adaptto Mini-E/Max-E Owner's Thread
Replies: 5185
Views: 647038

Re: Adaptto Mini-E/Max-E Owner's Thread

could somebody help me out: my Adaptto stopped working, after I left it ON for 1 week. It was turned ON because of balancing and I forget to shot the controller off. After 1 week I wanted to drive again, but the display was off in the ON position of the lock. No chance to turn it on again. Checked t...
by burner77
Oct 24 2017 12:27pm
Forum: Motor Technology
Topic: MXUS coming out with a 5K-Turbo motor, 55mm Magnets
Replies: 226
Views: 43543

Re: MXUS coming out with a 5K-Turbo motor, 55mm Magnets

csc wrote:Ok sorry, my mistake. Did not see the first graph

Have you tested a 5k in real life ? I'm very curious !
not yet, since my Adaptto died. But from the specs should be at least QS205 level, which is much torqier than the Clyte
by burner77
Oct 24 2017 11:31am
Forum: Motor Technology
Topic: MXUS coming out with a 5K-Turbo motor, 55mm Magnets
Replies: 226
Views: 43543

Re: MXUS coming out with a 5K-Turbo motor, 55mm Magnets

Thanks again, though the one that I have to compare in Justin's app is the 5403 (you talk about the 5303). That 5403 thing is around 13 kilos, similar to the 5k. I have talked about 5403 and 5303 if you read carefully. I have sold Crystalyte before and had 5403, Cromotor, QS205, 3K all in the same ...