Endless Sphere

Look on you tube on how to make a simple angle iron sheet metal bender.

Just fitted a cheap rubber valve stem 1.75 inner tube in my 2.35 fat frank tyre and the tube seems to be slipping inside the tyre.Angling the stem within 5 miles twice.Correct size tube on order.

Read an old motorcycle book "Speed and how to obtain it" it recommended drilling the rims in four places each side and fitting self tapping screws. Trails and motocross bikes now use rim locks. Don't know if you can get rim locks for push bike sized wheels maybe someone could 3d print some.

Sorry shouldn't have said motor shaft. The motor spins around the axle the axle is bolted to tbe bike frame the plate is attached to the axle with the key. The motor has a small fixed metal cog that spins the planatery gears. See the 62 page thread on how the motor changes gear by reversing and the ...

It uses a small oblong keyway and key on the motor shaft and plate.

The posts are 0.8 mm taller than v 1.

Bruce Teakle has a new video on you tube "Xiongda 2- speed hub motor with slipping motor magnets" link on the video to his blog on how he fixed it. He was lubricating and cooling the motor with ATF but does not know if the ATF caused the magnets to loosen because he has run another Xiongda...

Just got my hands on Version 2. The caps fit together much better.Longer posts so you can fit more bus bars if you want.

When mine broke I noticed on pulling it apart there was only one spring in the clutch the pencil is pointing to it. In the line drawing there is 3. I asked Bonnie about this and she said that one was normal. I'm not an engineer but surely this is something to do with the clutch locking and breaking...

Makes me smile when people say don't push your bike backwards. I'm getting better at lifting the bike when moving it backwards after replacing the sun gear. Non Xiongda owners must laugh every time they roll their bike backwards "there goes another Xiongda motor ! " I stretched my single s...

When mine broke I noticed on pulling it apart there was only one spring in the clutch the pencil is pointing to it. In the line drawing there is 3. I asked Bonnie about this and she said that one was normal. I'm not an engineer but surely this is something to do with the clutch locking and breaking ...

Computer illiterate tablet user here if you could just bend a little and bring back tapatalk I would be very greatfull.I find it easier to navigate the site,post pics.I like the way I can change the back ground to black and I don't need to zoom in to read.I also like the app because it puts up a pic...

Epoxy glue all over around the head of the bolt might be a really bad idea, because it might function as an isolation, a high resistance layer. So I am thinking of using the glue only one small drop at the perimeter. Hopefully somebody comes with a better idea. By the way, pushing hard with a finge...

Does it have to be a pit bike.You could fit Any kit to a BMX or 24" wheeled mountain bike.

nathan89 wrote:Just wondering if someone can confirm if the kit comes with 100 or 104 caps? Conflicting info on the website. Need 104 to make 13s4p battery.

Thanks

100 caps,but I got a couple extra in the box.If you ask when ordering I'm sure they will put the extra 4 you need in the box.

Guys, I sent an email for a quote for a kit (motor+controller etc) to this address yona@xiongdamotor.com.cn on Sunday and still no news. To the people who delt with them, what kind of delays should I expect in communications? Thanks Try Bonnie@xiongdamotor.com.cn. Bonnie replied within a few days w...

mlt34 wrote:Looking good, what are you powering with it, craiggor?

Xiongda 2 speed motor.

5s pack won't fit in my battery box. https://uploads.tapatalk-cdn.com/20170603/4897af9b5a2fd40d4f23a63f5a9d2e5d.jpg shaved a bit off the sides of the pack. https://uploads.tapatalk-cdn.com/20170603/468590048bfb718ecbbb479329c6afaf.jpg Made some end caps from ice cream tubs. https://uploads.tapatalk-...

Have you considered taking your 48v battery apart and using something like the Vruzend DIY 18650 kit and reconfiguring the cells to 36v.

Sent from my D101 using Tapatalk

You could cut the posts down that are in the way of the diagonal bus bars. You would have to make your own bus bars because the gap between the diagonal screw terminals is longer. Or as you say ring terminals and wire.

If you cut some posts down you could use plates.

Great stuff the plates will cover all the bus bars.just need to wrap the sides then.

Sent from my D101 using Tapatalk

I'm going to drill and counter sink posts so pack can be bolted together. I am doing the same, but with tie-wrap loop through those holes. I will put another fine tie-wrap around those adjacent studs, to not push apart those holders out the locks, i would do it in your place as well. Yea nice idea.

I'm going to drill and counter sink posts so pack can be bolted together.

My kit arrived today very good service.