Endless Sphere

PRICES please.

Create a "bolt on" solution, not a "bend to yield" solution. You can easily lessen dropout width by extending the swinger a few inches and layering the anchors. Or increase the dropout width for a wider dimension. .....like a cheap extended swingarm on a rocketbike... They make n...

(One of ) my bike(s) have 3mm^2 wire phase cross section. I run 4Kw contin and 8kw peaks. It is a 1Kw motor rating. the phase wires? i do not know how they survived at all. they regularly approach " considerable warm and soft and whatnot". 8Ga batt power harness. Its still alive. I have us...

Finally, a bike.

Lol.

Dammit. Not knocking your purchase, but that charger sucks.. and the specs are all over the place. Is that like a glorified Opus charger? lol. Is it 15v? or will 14v blow it up? Says 15v, but below says over 14v will blow it up. It cannot do 6s (x) 8A balance current. nope. Can only 33w per. So ther...

What's the ISO refer to in this context? "IN SEARCH OF" wanted used 72 volt at least 20 AH battery for e motorcycle with votol 150 controller, prefer high discharge. Well I could if I did not have so many in front of you. I wish I coudl handle the workload I have honestly. keep looking, I...

Motors have a Tq./Amp number with the certain design. One vs another. Feed this much amps, get this much tq. ....put that in a rim to lever you along your way and have fun. The amount of butt dyno "umpf " this makes depends on the wheel diameter, load and how much work you put down. For th...

Well thanks guys. I can get them for 100$ ea. Shipped. I don't know if that's a good price, for used condition unknown ( operation al) ... I honestly should get them just to have them . Anyways thanks for the replies.

Can you run Elcons in series? Like a pair of PFC high power 36v Elcons.... ? A pair of Elcon TCCH 36-33 PFC 1500s? Two 36v matching for 72v @ 3kw? Anybody know? I would like to try this. I can get them mega cheep. Cheep Cheep. I know you can pay for a reprogram, 100$, after sending it back... Flippy...

I don't quite know what you mean, but they are individual breakers. Are you saying that the 5 pins in the side could be pushed out and replaced with pins that will combine multiple breakers together? I thought the only mechanical connection needed was simply that of the on/off switch itself? (which...

Well, you do have to spec your AC to the system you have. It does not need to be 60f inside. Oh yeah we had no idea what we were doing. ONe of those " get it done right before we actually plan anything" friends. Not a thing written down on paper. We went with 16s split into four boxes. I ...

Q's Motor lists all specs certainly. I like them. You can find them.

Or you can ask here. These people know everything. Someone here knows the answer.

Usually 23 or 16. Lol. Pretty much it.

Last rv I worked on had 220v appliances.

Shore power was 220v or 110.

We installed ( 2 @7kw) 14 kw of inverters and 30 kwh of brand new lifepo (at 6800$. ).... @48v.

It still doesn't keep up with the AC for more than a day. Lol.

Mine burnt after a year and in the bottom shell once winter set in. Blew up my CA. I had every option hooked up and running though. Dial, data, buttons, ebrakes, ect. One day it just blinked out. Grin sells a voltage regulator for this. IDK if anyone mentioned it yet. Tiny regulator. https://ebikes....

thorlancaster328 wrote: ↑

Mar 06 2021 12:56am

Oh! Ok Thank you I got a little confused there. Cool. I will have to try this someday. Ty.

If it uses current sensors, route wire (2 gauges thinner than the existing wire) in parallel with the existing wire. I did the shunt mod to one of my controllers (40 amp -> 70 amp) and it has run cool and fine for over a year. If it does, then it's time for a new controller. Could you explain the m...

More details indicate it will be 85,000 vehiles to recieve a replacement pack at a cost to Hyundai( +LG ?) of approx us$900 million ! That would imply a “factory cost” of aprox $10.5k per pack ( 64kWh) ..or $165 per kWh I believe GM are doing a similar recall/replacement on a similar number of Bolt...

So you conclude. I hear what you assert, truly.... and do, will take it as knowledge, as we all will, here in this thread. ps: running those tests is fine, but several people here already have done a LOT more testing then you will probably ever do. i have litteraly spent over 10k euro in test equipm...

I swear to GOD I will set up tw0 cells on 10 cycle tests, ... 2 sets. Identical, right out of the batch, numbered one right after the other...Cells. Identical chargers. Identical length leads... Identical temperatures of testing. Identical computer reading both chargers. Identical power supply for e...

let me broaden the question and give you a clue with the question that you should be asking yourself if you read these specs: what would it mean if the current has not dropped below 1/20C after the stated 3 hours with a standard charge of 1.375mA? if you get this question right you are already half...

The collective knowledge seems to disagree with you, Flip. its just you and john. answer the question. you had considerable time to google it, you should be able to come up with a decent answer by now. Battery University and John seem to dissagree. So does fatty. So do some others. The manufactures...

They did not test until "redline". They knew the power requirements ahead of production and designed the engine around this output, and the RPM to suit, with available manufacture process. I dont know why you bring up engines with a heat engine builder. You do not seem to think I know anyt...

[ Caution! ] ■ Electrical misusage Battery must be charge with constant current-constant voltage (CC/CV). Charge current must be controlled by specified value in Cell specification. Cut-off Voltage of charging must be 4.20V Charger must stop charging battery by detecting either charging time or cur...

Telling me the wording of "maximum" in the datasheet is not concrete. Really? Lol. I dont get it. One second you say the data says one thing, another instance you say you can do what you want. We get it you are special. lets recap: you cant read datasheets. you made conclusions based on th...

WHy? because you need to prove you actually understand what you are people telling that you know. i am just showing that you dont know and are talking out of your ass. if you are so good with all this: tell us. but this is still way beyond your level. lets stick to the basics here for now and expla...