Search found 1052 matches

by j bjork
Jul 27 2021 2:46am
Forum: E-Vehicles General Discussion
Topic: Votol EM-100 & EM-150 controllers
Replies: 1517
Views: 178716

Re: Votol EM-100 & EM-150 controllers

It is peak, like cheap controllers usually is rated.
I dont know exactly how it works, but it should translate to about 330A rms as you say.

For 500 Arms you can look at a sevcon gen4 size6 for example.
by j bjork
Jul 26 2021 2:19pm
Forum: EScooters/EMotorcycles
Topic: R Martin EVD Moped with HubMonster
Replies: 79
Views: 13367

Re: R Martin EVD Moped with HubMonster

Well, Electric god has been banned a few times with different user names and has deleted all his pictures.
So dont hold your breath waiting for updates :wink:
by j bjork
Jul 26 2021 1:16pm
Forum: EScooter/EMotorcycle Build Threads
Topic: KTM 200 exc goes electric
Replies: 234
Views: 41422

Re: KTM 200 exc goes electric

Yes, it sure is. For me it was fast, 19min and the track is about 9km. A decent rider is a lot faster though. My friend who has ridden mx a few years, and enduro a few years (something like15-20years in total) is about 2min faster I think. I dont know exactly, earlier in the season under harder cond...
by j bjork
Jul 26 2021 11:50am
Forum: E-Vehicles General Discussion
Topic: Votol EM-100 & EM-150 controllers
Replies: 1517
Views: 178716

Re: Votol EM-100 & EM-150 controllers

Yes, bartosh did somewhere in the thread.
I think it did about 470pA in the recommended max settings, and 540pA in absolute max settings.
That is with the older model em 150sp, not the newer with the odd feald weakening settings.
by j bjork
Jul 25 2021 12:10pm
Forum: EScooter/EMotorcycle Build Threads
Topic: KTM 200 exc goes electric
Replies: 234
Views: 41422

Re: KTM 200 exc goes electric

Ok, I did a little video of a lap today.
It is not from the track we were talking about, this is the track I have ridden most.
It was very dry today, so not much mud and water.

https://youtu.be/IfjwCB9gdx4
by j bjork
Jul 24 2021 10:41am
Forum: EBike Troubleshooting
Topic: enormous loss of max speed / acceleration at around 71 volts.
Replies: 11
Views: 248

Re: enormous loss of max speed / acceleration at around 71 volts.

No, it cant be your bms or battery if you have stable voltage while accelerating.
by j bjork
Jul 24 2021 10:36am
Forum: EBike Troubleshooting
Topic: enormous loss of max speed / acceleration at around 71 volts.
Replies: 11
Views: 248

Re: enormous loss of max speed / acceleration at around 71 volts.

Are the controllers programmable? It sounds like you have a amp limit a few volts before lvc. There usually are, at least on decent controllers. But it seems like in your case it might be set a little high in the voltage range. Do you know your lvc? (at what voltage your controllers completely cut o...
by j bjork
Jul 24 2021 8:03am
Forum: EScooter/EMotorcycle Build Threads
Topic: Conversion of a Bultaco Sherpa
Replies: 93
Views: 4377

Re: Conversion of a Bultaco Sherpa

If you can it would be better to move the fuse as close to the battery as possible. That way you will have wiring etc after the fuse, and protected in case of damage. Now you are only protected if something happens in or on the controller, or in the motor and wiring between the motor and controller....
by j bjork
Jul 24 2021 7:54am
Forum: EScooter/EMotorcycle Build Threads
Topic: Yamaha YZF250F
Replies: 168
Views: 10364

Re: Yamaha YZF250F

It cures fast in the hot weather.. https://i.imgur.com/UuD2vxL.jpg I actually had problems that the polyester cured in the roller, so I had to change it. It wasn't easy to get the mold of the model, the model is not the same anymore.. https://i.imgur.com/rDDZFMA.jpg I shouldn't need it anymore eithe...
by j bjork
Jul 23 2021 3:47am
Forum: Motor Technology
Topic: QS203 3T Sabvoton 72100 need more low speed power?
Replies: 6
Views: 154

Re: QS203 3T Sabvoton 72100 need more low speed power?

I dont have the bike anymore, but it wasent easy to keep the front wheel down.

Image

Image
by j bjork
Jul 22 2021 3:10pm
Forum: Motor Technology
Topic: QS203 3T Sabvoton 72100 need more low speed power?
Replies: 6
Views: 154

Re: QS203 3T Sabvoton 72100 need more low speed power?

If you had posted your settings it would have been easier for someone who knows sabvoton to suggest changes. There are a lot of sabvoton threads here, so you can probably find a lot of answers in some of them. Do you mean that you have a QS 205 50h 3t? In that case, bottom line is that you have a wa...
by j bjork
Jul 21 2021 3:46pm
Forum: EScooter/EMotorcycle Build Threads
Topic: Yamaha YZF250F
Replies: 168
Views: 10364

Re: Yamaha YZF250F

https://i.imgur.com/dwM1eY2.jpg I soo want to try if I can brake it off the model, but it would be very stupid to do so before the mold is finished. I only waxed the model a lot of times, I usually put on "release film" too(it probably isn't the right term in English) To make sure I can g...
by j bjork
Jul 21 2021 2:34pm
Forum: EScooters/EMotorcycles
Topic: QS 138 70H with Gearbox
Replies: 101
Views: 5956

Re: QS 138 70H with Gearbox

*ehrm* indicate a winding change where 60*70/90*(20/16) gives kV 58 for the 90H with some basic assumptions behind. I get all the other things you said, but not really this calculation. I can do the calculation and get the result, 58,3333. So 60x70 is 60kv for the 70h? And then divided by 90 for 90...
by j bjork
Jul 21 2021 2:04pm
Forum: EScooter/EMotorcycle Build Threads
Topic: KTM 200 exc goes electric
Replies: 234
Views: 41422

Re: KTM 200 exc goes electric

I also bent one of the foot pegs, and I saw those holeshot alu ones with spikes were actually available for my bike: https://i.imgur.com/97SOhwT.jpg My friends tell me they are so much better, so I thought I just as well take the opportunity to try them. Expensive little buggers :roll: My plastics w...
by j bjork
Jul 21 2021 1:29pm
Forum: EScooters/EMotorcycles
Topic: QS 138 70H with Gearbox
Replies: 101
Views: 5956

Re: QS 138 70H with Gearbox

I wish you could both stop fighting about this, we are all learning from each other here.. From what I understand you are supposed to determine kv from back emf or how it was. But when I only tested no load rpm to get close I got about 60 on the 70h from what I remember. How is your kv for the 90h d...
by j bjork
Jul 21 2021 4:47am
Forum: EScooter/EMotorcycle Build Threads
Topic: Yamaha YZF250F
Replies: 168
Views: 10364

Re: Yamaha YZF250F

The plan is to not have to paint the battery box, so I am trying to get as good mold as possible. It will be difficult, because I have to make a split mold to be able to take them apart. Trying to make a seamless split: https://i.imgur.com/XEVdaWM.jpg No tape on the part I am making first to not get...
by j bjork
Jul 19 2021 3:26pm
Forum: EScooter/EMotorcycle Build Threads
Topic: Yamaha YZF250F
Replies: 168
Views: 10364

Re: Yamaha YZF250F

Paint and more sanding: https://i.imgur.com/Eztkxoq.jpg I thought I got some sort of bubbles in the paint, and tried to sand it off: https://i.imgur.com/QYwIGAa.jpg It was not the paint, it was the wood :? I guess I could grind off some material and start over with putty and sanding, but wtf this it...
by j bjork
Jul 17 2021 1:14pm
Forum: General Discussion
Topic: how about a 3d printer section?
Replies: 30
Views: 356

Re: how about a 3d printer section?

I think it would be nice to have a 3D printer section. I don't think forum threads with tens of pages that you have to dig through are a great way to share information. I also don't really see a problem with a slightly inactive forum section. It's just another bit of text for people to scroll past ...
by j bjork
Jul 17 2021 12:07pm
Forum: EScooter/EMotorcycle Build Threads
Topic: Yamaha YZF250F
Replies: 168
Views: 10364

Re: Yamaha YZF250F

Finally finished sanding on this thing:

Image

Image

I thought it would go on forever, I soon wouldn't have any fingertips left :roll:

Now some paint and more sanding..
by j bjork
Jul 16 2021 2:53pm
Forum: EScooter/EMotorcycle Build Threads
Topic: Yamaha YZF250F
Replies: 168
Views: 10364

Re: Yamaha YZF250F

Not really, I think the best way is to make your own cad drawings and try the local water cut places. That is what I do. But I get my parts raw, so I have to do the finishing work myself: https://i.imgur.com/1SmVPqd.jpg But I guess it is mostly a question about how much work they have, and how much ...
by j bjork
Jul 13 2021 3:21am
Forum: General Discussion
Topic: I cant enter any threads, get "SQL ERROR"
Replies: 3
Views: 147

I cant enter any threads, get "SQL ERROR"

When I try to enter I get:

Image

I have tried both phone and computer.
by j bjork
Jul 12 2021 1:57pm
Forum: EScooter/EMotorcycle Build Threads
Topic: KTM 200 exc goes electric
Replies: 234
Views: 41422

Re: KTM 200 exc goes electric

I can imaging that the time it took to charge in between laps was very welcome to "charge yourself" by resting a bit... Please make a video of a lap for us some time 8) Yes, it was no problem to wait a little for the charging :wink: But it was pretty fast, I charged with 45A. And I didnt ...
by j bjork
Jul 11 2021 2:26pm
Forum: EScooter/EMotorcycle Build Threads
Topic: KTM 200 exc goes electric
Replies: 234
Views: 41422

Re: KTM 200 exc goes electric

3 laps today of that 20km track, with charging between each lap. Holy shit, I have never done 60km in a day before :shock: If I had the phone with me I would have taken a picture when I made a bad line selection and got stuck. I got caught in a deep mud hole. I could just get off, and the bike were ...
by j bjork
Jul 10 2021 1:33pm
Forum: EScooter/EMotorcycle Build Threads
Topic: KTM 200 exc goes electric
Replies: 234
Views: 41422

Re: KTM 200 exc goes electric

Btw, it did fine today :wink:
Crazy long 20km laps, I did almost 2.
Well, I actually finished 2 laps.
But on the second one I had to wait for the battery to pick up a little voltage, give very gentle throttle and push the final km or so :lowbatt:

Tomorrow I will bring a charger :bolt:
by j bjork
Jul 10 2021 1:16pm
Forum: EScooter/EMotorcycle Build Threads
Topic: KTM 200 exc goes electric
Replies: 234
Views: 41422

Re: KTM 200 exc goes electric

I plugged in the charger on Thursday just to adjust down the amps for another battery. Then I got a bms fault (again) and I was supposed to ride both today and tomorrow (Saturday and Sunday) https://i.imgur.com/VYHuIG8.jpg Here we go, it was just to tear it all down. https://i.imgur.com/LWI1SqC.jpg ...